User manual PIONEER XC-IS21T

[. . . ] FOLLOW INSTRUCTIONS -- All operating and use instructions should be followed. CLEANING -- Unplug this product from the wall outlet before cleaning. The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet. [. . . ] There's another menu, the TIMER menu, which is available in any mode. From the timer menu you can set the clock, as well as use the wake up, record and sleep timer features. To display this menu, use the TIMER button instead of the MENU button. You should now have your system installed with everything connected up and plugged in. This chapter takes you through using the basic features: playing CDs and tapes, listening to radio stations, and adjusting the volume, tone and balance to get the sound you want. first of all , we'll set the clock. This is mainly used for timer functions, such as the sleep timer, though you can also use the display as a clock. Unless you unplug the unit, or there's a power failure, you only need to set the clock once. The display lights and briefly indicates the current volume level before showing the current function (e. Press TIMER to display the timer menu, then press 4 or ¢ until CLOCK ADJUST is shown in the display, then press SET. The display changes to show a date and time, with the day part of the date blinking to indicate that you can set it. The display shows the number of tracks on the disc and the total playing time when the disc is stopped. In step 2 above, pressing the CD button closed the disc compartment and set the disc playing. In fact, pressing this button is always the quickest way to play a disc. If there's already a disc in the player, then pressing the CD button--even when the system is in standby mode--will switch the system on and start the disc playing. Be careful not to trap your fingers in the disc compartment as it closes automatically. The automatic opening of the disc compartment works using an infrared sensor. The room is lit using fluorescent lights · the unit is on a dark-colored surface · The unit is placed adjacent to a wall or other surface On its default setting, the door open sensor may open the disc compartment even if a CD is playing. You can change this so that it will only work if the CD player is stopped, or you can switch it off altogether (see page 49). Volume is adjustable from zero (silence) to 36 (maximum volume) using the volume + and ­ buttons on the remote. You can also adjust the bass, treble, balance and subwoofer level to get the sound you want. Start a disc playing before working through the steps below so that you can hear the effect of changes as you make them. [. . . ] For example, in a brightly lit room you'd probably want the display brighter than in a room with low lighting. Remember: switch between menu options using 4 and ¢; select the option by pressing SET. When switched on, the blue lights on the disc compartment door changes (3 levels) with the display brightness. If you prefer, you can show the time in 24-hour format. [. . . ]