User manual PIONEER XW-NAS5-K

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] This unit can not record the other input's sound. It may not be possible to record tracks of audio CDs on a USB device. Push the USB terminal cover as shown Only when a CD is in the stop mode, recording can start. If recording does not start, confirm this unit's settings on the TV screen. The audio signals are converted into MP3 format for output. `CD -> USB Rec' can only be selected when the audio CD is stopped. When recording is completed, a folder named "PIONEER" is automatically created on the USB device. The recorded tracks are stored in this folder. Only when a CD is in the stop mode, recording can start. Playing in the desired order (Programmed Play) This unit can play repeatedly files stored in the USB storage device. This unit can not transfer FM radio from the HDMI OUT terminal. This makes loud sounds weaker and weak sounds louder. Change the setting for example when watching movies late at night. This setting only affects Dolby Digital sound. Try different settings, and choose the one providing the strongest effect. Change this setting if the sound of dialogs is low and the dialogs are hard to hear. This setting only affects multichannel sound. When audio data is removed during the compression process, sound quality often degrades. In the USB mode, you can only change the Play Mode and Audio Settings on the HOME MENU screen. Adjusts the look of the dark portions of the picture. This setting is effective for sources with many colors, such as cartoons. Brightness, Contrast, Gamma, Hue and Chroma Level are set to 0 upon purchase. [. . . ] Also do not use record spray or antistatic agents. For tough dirt, apply some water to a soft cloth, wring out thoroughly, wipe off the dirt, then wipe off the moisture with a dry cloth. Do not let the signal surface of discs get scratched or dirty. Do not attach pieces of paper or stickers to discs. [. . . ]