User manual PITSOS B98991X

[. . . ] en Instructions for use 9000181057 (1W06NR) 00-8705 Independent ceramic hob Table of contents Important information . Familiarising yourself with the appliance . 5 5 5 7 9 9 10 11 Main switch with childproof lock . 16 A hotplate is to switch off automatically . [. . . ] Switch down to a lower heat setting in good time. Cooking with small quantities of water Lowering the heat setting Timer function This function can be used in two different ways: - to switch a hotplate off automatically - as a cooking timer A hotplate is to switch off automatically You enter a specific cooking time for the desired hotplate. When the cooking time has elapsed, the hotplate switches off automatically. 16 Setting procedure 1. Set the heat setting on the hotplate which is to be operated with the timer function. 2. Touch the - and + symbols at the same time. The 1 indicator for the required hotplate flashes. If you select a different hotplate, touch the - and + symbols repeatedly and at the same time until the 1 indicator for the required hotplate flashes. 3. Touch the - or + symbol. The default value appears. For +: 30 minutes For -: 10 minutes The 1 indicator for the hotplate flashes again. 4. Touch the - or + symbol until the desired cooking time appears in the timer indicator. The cooking time flashes for several seconds and then disappears. If you have set a cooking time for several hotplates, it is always the shortest cooking time that is displayed. When the cooking time has elapsed When the cooking time has ended, the hotplate switches off. A 0 appears in the heat setting indicator. 00 flashes in the timer indicator and the 1 indicator flashes. Touch the - and + symbols repeatedly and at the same time until the required 1 indicator flashes. Change the cooking time using the - or + symbol. Touch the - and + symbols repeatedly and at the same time until the required 1 indicator flashes. Set the timer function to 00 using the - symbol. The indicator goes out after a few seconds. Changing the cooking time Cancelling prematurely 17 Notes If you would like to call up the remaining cooking time for a hotplate: Touch the - and + symbols repeatedly and at the same time until the 1 indicator for the relevant hotplate flashes. The cooking time is displayed for 5 seconds. Automatic time limit can also be activated using the timer function. The timer function is no longer active after a power cut. Cooking timer Setting procedure You can use the timer on your cooker to set a time of up to 99 minutes. [. . . ] Disconnect the appliance from the mains and reconnect it. Consult the after sales service if the display appears again. If F and a number flash alternately in the display, your appliance is indicating a fault. The following table contains measures for rectifying faults. [. . . ]