User manual PITSOS WFP1000B6

[. . . ] General safety guidelines and warnings Removal and disposal of packaging Environmental protection / Saving energy Installing the appliance Removing the transport security devices Fixing the appliance Connecting to the water supply Water drainage Connecting to the electricity supply Getting to know your new appliance Programme selector Function selection and start buttons 3 3 4 4 4 5 5 6 6 7 8 8 Detergents and additives First washing cycle Preparing the laundry for washing Loading the laundry Washing the laundry End of the wash programme/Removing the laundry Cleaning / Maintenance / Frost protection Technical data Minor faults with simple solutions After Sales Service Consumption figures 12 13 14 15 15 p. 8 9 9 10 10 11 1 2 3 4 5 6 7 2 en 8 9 General safety guidelines and warnings This appliance complies with current safety standards in the sector. Points to bear in mind when washing clothes: !The appliance should only be used with cold water from the public water supply. The appliance should only be used for washing clothes suited to household washing machines. [. . . ] ëéãüôåñï óéäÝñùìá: laundry comes loose in the drum to avoid creasing. M: The selected programme is activated. The «M-Q» indicator comes on. For security reasons, the machine does not start until the door is closed properly. Ýíáñîç Detergents and additives All standard use detergents for automatic washing machines can be used. Do not use detergents with solvents in the washing machine!Do not use additives, cleaning sprays or stain removers in the vicinity of the appliance, as they may damage it. Keep detergents and additives in a safe place, away from children. Amount of detergent Only using the correct measure of detergent will guarantee good wash results. Note the manufacturer's recommendations. 8 en First washing cycle Carry out the first washing cycle without any laundry in the machine to remove residual wa ter left inside the drum as a result of testing of the machine at the factory. m Pour approximately 2 litres of water and half a measuring glass of normal detergent into the compartment II of the detergent drawer. m Set the programme selector to «ÁíèåêôéêÜ 90ºC». The «M-Q» indicator light flashes. m Press the «Ýíáñîç M» button. The «M-Q» indicator comes on. m When the «B-m» light flashes, turn the pro gramme selector control to «stop». Preparing the laundry for washing Sorting the laundry m Sort the laundry according to the symbols on the labels. - Compartment I: Detergent for pre-washing. - Compartment II: Detergent for main wash, limescale remover, stain removing salt. . . - Compartment 2 : Additives for the last rinse, for example softeners. m Turn on the tap. ! m Add the outspread and unfolded laundry, mixing large and small items. Washing the laundry Starting a programme m Turn the programme selector to the required wash programme. The «M-Q» indicator light flashes. m Press one or more function selection buttons (optional). The relevant status indicator light comes on. m Press the «Ýíáñîç M» button. The «M-Q» indicator comes on. [. . . ] Select the most suitable wash programme for the laundry. Disconnect the appliance for 5 10 minutes. To prevent the build-up of foam, put a dessert spoon of softener mixed with half a litre of water in the detergent drawer. Reduce the amount of detergent used in your next wash. [. . . ]