User manual PITSOS WFPI600D

[. . . ] Table of Contents Operating Instructions Safety instructions . Preparing, sorting and adding the clothing . Measure out washing products and additives . Start time indicator Ýôïéìï óå and Òñá (h) . [. . . ] q After approximately 10 minutes, set the program me selector to stop. The laundry remains in the drum full of water. q Once the required soaking time has elapsed, se lect a programme; the wash water is emptied. i Only use a little detergent for the main wash. 21 Starching The clothing should not have been previously treated with softener. q Measure out the quantity of starch for approxima tely 15 l of water. Let the starch powder dissolve firstly, following the manufacturer's instructions. q Set the programme selector to îÝâãáëìá. q Adjust the rotary speed; L is also possible. q Press the Ýíápîç M button. As soon as water starts going in: q Gently pull the drawer out and q pour the dissolved starching agent into compart ment I. If L has been selected, now activate Üíéëçóç. 22 Cleaning and care d Danger of electric shock Always disconnect the appliance from the mains be fore cleaning it. Never clean the machine by directing a jet of water at it. d Danger of explosion Never use solvents to clean. Cleaning the outside of the appliance, the control panel and the pipes. Cleaning the drum If necessary: q Use a little soapy water or a soft, non-abrasive detergent. q Dry with a soft cloth. If rust marks are appearing that are caused by metal objects (e. g. coins, clips, safety-pins, etc. ): q Use non-chlorine cleaning products; Follow the manufacturer's instructions. Never use steel wool. Removing limescale from the appliance Warning!Products for removing limescale contain acids which may damage the appliance's components or cause discolouration in the laundry. Removing limescale is not normally necessary if the correct dosage of detergent has been used. However, if it becomes necessary to remove the lime scale, the instructions provided by the limescale re moving product should be followed closely. 23 Clean the detergent drawer When detergent or additive residue has built up: q Pull the drawer out fully, q press on the moveable part, and q completely remove the drawer from the appliance. q Pull moveable part. upwards. q Clean the drawer with running water and dry it. q Close the moveable piece and fix it. q Put the drawer back in. 24 Clean the drainage pump Emptying the wash water If the wash water is not completely emptied. [. . . ] If the appliance is not on a proper level, there may be noise and vibrations. 40 Connecting to the mains Warning!Only connect the washing machine to an alternating, earthed power point that has been properly installed. The voltage of the network should match that of the voltage data indicated on your washing machine (let tering on the appliance). This lettering indicates the connected power and fuse necessary. [. . . ]