User manual PIXELA PIXEBURN FOR HD

[. . . ] Prior to Use Instruction Manual "PixeBurn!for HD" enables you to write videos recorded in AVCHD standard onto DVD or BD discs without changing the picture quality. Connect the camcorder with your Mac to write a disc. To Operate Refer to the following Web site for the latest information and troubleshooting. [. . . ] Use the camcorder's power adapter to power the camcorder. Refer to the camcorder's instruction manual for the operation, connection, and precautions of the camcorder. When playing back ". m2ts" or ". MTS" files, refer to the instruction manual of the playback application for operation and precautions. Do not run other software or put the computer in Sleep mode while writing a disc. You cannot write contents on a used DVD-R, DVD-R DL, BD-R, and BD-R DL. You cannot add contents on a used DVD-RW and BD-RE. All the contents on the disc should be erased before writing. To Operate To Front Page Prior to Use Description of This Document Precautions Notes for Operation Trademarks Mac and Mac OS are registered trademarks of Apple Inc. Intel is a registered trademark of Intel Corporation. AVCHD and AVCHD logo are trademarks of Panasonic Corporation and Sony Corporation. Blu-ray is a trademark of the Blu-ray Disc Association. The company names and brand names referred to in this document are the trademarks, registered trademarks, and products of their respective companies. The ® and TM marks have been omitted in this document. » Trademarks Specifications System Requirements To Operate To Front Page Prior to Use Description of This Document Precautions Notes for Operation Trademarks Specifications Readable files Video files recorded with the camcorder supporting AVCHD standard. DVD-R, DVD-R DL, DVD-RW BD-R, BD-R DL, BD-RE, BD-RE DL Writing may fail if writing volume approximates to the disc capacity. 8cm disc is not supported. Writable discs » Specifications System Requirements Writing time Operation Estimated writing time Approximately 30 minutes To Operate Writing 4. 2 GB video on a DVD-RW in double speed after erasing existing data by [Quick erase]. Writing 10 GB video on a BD-R in double speed. Approximately 40 minutes Use above chart as a guide. Estimated time varies according to the performance of your Mac or disc drive. To Front Page Prior to Use Description of This Document Precautions Notes for Operation Trademarks Specifications System Requirements Supported OS CPU Memory Leopard (Mac OS X 10. 5) Snow Leopard (Mac OS X 10. 6) CPU made by Intel Corporation Leopard: 512 MB or higher Snow Leopard: 1 GB or higher Installation: approximately 15 MB Disc writing: the volume to write onto a disc + 1 GB "+ 1 GB" is not needed if "Work folder location" in the Preferences is set to the volume other than System volume » System Requirements To Operate Hard disk capacity Supported drive A drive supporting DVD or BD disc writing. The above is the lowest system configurations to operate this software. Full operation is not guaranteed even if system configurations are satisfied. [. . . ] This method can erase faster than [Complete erase]. [Complete erase]: Erase the recorded data completely. It may take more than 60 minutes depending on the contents. Select [Complete erase] if you fail in erasing with [Quick erase] or fail in playing back the written disc. 4 Finish To Front Page Prior to Use Finish To Operate Introduction 1 Select camcorder 2 Select drive 3 Set disc 4 Select movies 5 Write disc CONTINUE If you continue writing using the same device, click . » Finish If you failed in writing a disc. . . Check the following and retry from "Prepare Disc": Click to quit. Check if there is an enough space for "the volume to write onto a disc + 1 GB" in the work folder. [. . . ]