User manual PLANAR PL150 Product Manual

[. . . ] PLANAR LCD MONITOR PL150 MANUAL www. planar. com Important Safety Instructions Read the Safety Instructions carefully and keep it for later use. Be aware of all warnings and instruction signs marked on the products. When cleaning, cut off the electrical supply at all times. Never use liquid or aerosol detergent, use a damp rag instead. [. . . ] Please note that this monitor can only be tilted backward to 30 degrees. To prevent damage to the monitor, do not press the screen backward over 30 degrees. (see Figure C below). Folding Up the Monitor Remove AC adaptor and signal cable. Set the rear side facing yourself (see Figure B below) Press down on the stand with your left hand and gently tilt the screen backward with your right hand (see Figure C below). Do not forcefully press down the screen Press the button with your left forefinger (see Figure D below), and gently fold back the monitor facing up. (see Figure E below). Figure A Figure B Figure C Figure D Figure E 5 Quick Installation Make sure the computer is turned off. E N G L I S H Attach the female end of the power cord (Indication A) to the adapter (Indication B), then plug the adapter connector to the power "DC-IN (Indication D)" jack of the LCD monitor. When using a power cord, plug the male end into the wall socket. Plug one end of the signal cable (Indication C) in the "ANALOG" video signal connector (Indication E) of LCD monitor Turn on the computer. Before your operations of the monitor, please refer to P. 7 "Operations" first. E D B C A A. ANALOG 6 Operations Push the power button (Indication E) on the front of the LCD monitor to turn it on. When the power light (Indication F) turns green, the LCD is ready to use. Push the power switch button to turn off. E N G L I S H Function Keys Menu Auto A B C D E F A. 2. Press this button to turn on/off the OSD(On Screen Display) main menu. Press this button to activate selected items. To increase the value of selected item. B. Power LED Press this button to activate "AUTO SYNC" function. Press this button to turn on/off the monitor. When the light is green, the power is on; orange when the power is active off. Hot Keys Smoothing: When OSD menu is not displayed, press the [-] button to activate smoothing function. Auto-Contrast: When OSD menu is not displayed, press the [+] button to activate Auto-Contrast. Auto-Sync: Press the [Auto] button to activate Auto-Sync under any circumstances. 7 OSD Main Menu For screen adjustments, press the [Menu] button to display the OSD (On-Screen Display) Main Menu shown below. Press the [+] or [-] button to scroll up or down the menu to your required options. Please note that the OSD will automatically turn off in 30 seconds without any manipulation or by simply pressing the [Menu] button for 2 seconds. E N G L I S H CONTRAST Adjusting the contrast level of the screen image. Under Main Menu, select CONTRAST using the [+] or [-] button, then press [Menu] button to activate the function. Press the [+] button to increase contrast, [-] button to decrease contrast shown below. [. . . ] Composite Sync (TTL Compatible), Sync on Green, H. F. : 30-62kHz, V. F. : 50-75Hz, Video Bandwidth: 80MHz Up to 1024 x 768 Power Macintosh up to 1024 x 768 VESA 1024 x 768 @ 60Hz AC100-240 VAC, 48-62Hz 12VDC Adapter 15 pin D-sub 304. 1 mm (H) x 228. 1 mm (V) 32 F to 104 F (0 to 40 ) 10% to 90% (non-condensing) to 10, 000 feet -4 F to +140 F (-20 to +60 ) 10% to 90% (non-condensing) to 40, 000 feet 321. 6 mm(H) x 338. 4 mm(W) x 152. 0 mm(D) 12. 7" (H) x 13. 3"(W) x 6. 0"(D) 425. 0 mm(H) x 480. 0 mm(W) x 132. 0 mm(D) 16. 7" (H) x 18. 9"(W) x 5. 2" (D) 3. 25 kg (7. 16 lbs) 4. 90 kg (10. 79 lbs) UL, cUL, TUV/GS, CB Report FCC DoC, CISPR 22 B, BSMI MPR 1990:10, TCO99, PR EN50279 CE EPA, NUTEK SEMKO Power Down, Energy 2000 SEMKO Ergonomics, ISO 13406-2 TCO99, TCO95(option) 35W (green LED) (Max. ) 3W (orange LED) E N G L I S H Input Signal Video Sync Compatibility PC Macintosh Primary Mode Voltage Input Signal Full screen Temperature Humidity Altitude Temperature Humidity Altitude Physical Package Resolution Power Connector Display Area Operating Conditions Storage Conditions Dimensions Weight Net Gross Safety EMI Low Radiation EMC Energy Star Quality Environment On Off Regulations Power saving All products and trademarks are brand names of their respective companies. Specifications are subject to change without prior notice. 13 Factory Preset Timings Timing VGA 640 X 350 VGA 720 X 400 VGA 640 X 400 VESA 640 X 480 VESA 640 X 480 VESA 640 X 480 VESA 640 X 480 VESA 800 X 600 VESA 800 X 600 VESA 800 X 600 VESA 800 X 600 VESA 832 X 624 VESA 1024 X 768 VESA 1024 X 768 VESA 1024 X 768 VESA 1024 X 768 VESA 1024 X 768 Horizontal Frequency (KHz) 31. 470 31. 467 31. 469 31. 469 37. 861 37. 500 35. 000 35. 156 37. 879 48. 077 46. 875 49. 715 48. 363 56. 476 58. 036 60. 023 60. 241 Vertical Frequency (Hz) 70. 089 70. 082 70. 087 59. 940 72. 809 75. 000 66. 667 56. 250 60. 317 72. 188 75. 000 74. 535 60. 004 70. 069 71. 916 75. 029 74. 927 Sync Polarity (H/V) +/-/+ -/+ -/-/-/Composite +/+ +/+ +/+ +/+ Composite -/-/-/+/+ Composite E N G L I S H Power Management System This monitor matches VESA DPMS (Display Power Management Standard) Standards. For the monitor's power saving features to work, the video board or computer must also match VESA DPMS standards. The Off state means the monitor is in the lowest DPMS state with the highest power savings. 14 Appendix FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ]