User manual PLANAR PQ1710M Product Manual

[. . . ] This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Follow all the warnings and instructions illustrated in the manual. Don't overload the wall outlets and extension cords as this can result in fire or electric shocks. Do not remove or open the cover to service this monitor yourself. It may expose you to dangerous voltage or other hazards. Please refer all servicing to qualified service personnel. Unplug this monitor from the outlet and refer servicing to qualified service personnel under the following conditions. The monitor has been dropped or the cabinet has been damaged C. When the monitor displays a distinct change in performance, this indicates a need for service. The power cord is the main device to disconnect the power. Unplug the power cord when you do not use the monitor for a long time. Place the monitor in a well ventilated area and protect it from strong light, overheating and moisture. This monitor must be stored in a room in between the temperature of ­20°C ~ +55°C. Storing outside this range may cause permanent damage. 7 GENERAL NOTES 1. Introduction 1. 1 General Information This monitor is a high-performance intelligent multi-scanning color monitor utilizing active matrix TFT LCD display that uses amorphous silicon TFT as a switching device. With very low radiation, anti-glare surface treatment and small footprint, it is very suitable for home and office applications. 1. 2 Features LCD TFT 19" monitor Built-in multimedia speakers Multi-language OSD interface Auto adjusting imaging White and black reference voltage auto-calibration Compliant with EPA energy star, VESA DPMS Plug & Play 1. 3 Check List Check the list before operating this monitor. Please make sure that all of the following items are included. LCD monitor Base + mounting screw AC adapter Power cord VGA Signal cable DVI cable Audio cable User's manual If any of the above listed items are missing, please contact your dealer for technical support or customer service. 8 2. Installation The following chapters explain how to install the base and connect the monitor to your personal computer. 2. 1 Installing the Base Follow these steps to install the base: 1. Assemble the base to the arm with screw. Tighten the screw with a coin. 2. 2 Installing the Monitor Before starting, make sure that the computer and monitor's power are both turned off. Please follow the steps to install your LCD monitor: 1. Signal cable connection: Plug one end of the signal cable into computer and lock the two bolts. [. . . ] " to make the monitor adjust Picture is blurry, to big or small Picture is too dark Enter OSD menu and adjust contrast and brightness. Keep 5 cm away from other goods for ventilation. Check the PC setting, select the proper resolution and adjust refresh frequency. Check if the signal cable pins are twisted or broken. [. . . ]