User manual PLANAR PT1704N Product Manual

[. . . ] PT1704Z Manual 1-866-PLANAR-1 customerservice@planar. com Preface PREFACE About this manual This manual is designed to assist you in setting up and using your New Planar LCD Monitor. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. [. . . ] Press either button to vertically scroll through the main menu and submenu items. Adjust Control Buttons This button allows you to apply settings and enter submenus in the OSD. This button also serves as an Adjustment Control button. Power ON / OFF and Menu Button This button allows you to activate the OSD Menu. The button is also used as a power ON/OFF switch. Press the button to activate the OSD Menu. Press the button and hold it down for two seconds will turn on or turn off the monitor. Power-On Indicator This LED indicator stays lit when the power is on and when the monitor is receiving a proper video signal. The LED will blink slowly when the LCD monitor is in power saving mode. Monitor Stand The monitor stand supports the LCD monitor. Stereo Speakers 2. 3. 4. 5. 6. 7. Your New Planar LCD Monitor -- Rear View 2 Chapter 1 1. Using the OSD, you can adjust the contrast, brightness, display position, display clarity, and color temperature. You can also adjust the stereo speaker volume and set OSD parameters. Please read this chapter carefully to get the most out of your New Planar LCD Monitor. Adjusting the Monitor's Display The LCD monitor features an intuitive, menu-driven, On-Screen Display (OSD). You can access the OSD any time that the PC is powered up. If the PC is in a power saving mode, or is powered down, the OSD is inaccessible. OSD Main Menu To activate the OSD Main Menu, press the topmost Function key. To navigate the topline menu, use the down arrow key to scroll between the main menu choices. The option that is currently selected is highlighted in yellow. Each main menu has an associated submenu and is further described. OSD Main Menu To access the OSD Main Menu, simply press the Function button. Main menu Submenu Description The 7-topline menus are: The Auto Adjust option lets the monitor determine and select the settings that are most appropriate for your system requirements. This function will tune the display to your computers video card. The Monitor-Control option allows you to adjust the LCD monitor's display characteristics such as the display's horizontal or vertical position, display phase, display clock, and factory reset. [. . . ] Press the top (or bottom) Adjustment Control button and continue pressing the button until you see vertical dark and light lines across the screen. When you can see distinct light and dark vertical bands, stop pressing the Adjustment Control button. Now press the opposite (top or bottom) Adjustment Control button. The vertical dark and light bands will decrease in number. [. . . ]