User manual PLANAR PT170MU Product Manual

[. . . ] Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Compatibility Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Touch Screen Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 17 18 19 20 2 Usage Notice Warning- To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. [. . . ] Connect the DC power cord to the power connector (The arrow sign must face down); plug one end of the AC power cord into the power adapter, and then the other end into an electrical outlet(). For the PC with Analog output: Connect the VGA signal cable from display VGA input connector to the 15-pin connector of your host com puter and tighten the screws(). Connect the Audio-In cable from audio input port of your display to the Audio-out port of your computer(). Connect your headphone to Headphone port(). Connect the USB cable from USB input port of your display to the USB port of your computer(). Turn on your computer, display and video source. Notice: To ensure the LCD display can work well with your computer, please configure the display mode of your graphic card to make it less than or equal to 1280 x 1024 resolution and make sure timing of the display mode is compatible with the LCD display. We have listed the Compatibility Modes of this LCD display in appendices for your reference. 9 Figure 9. 1 A B C Headphone Audio-In Cable VGA Cable Power Adapter & Power Cord USB cable 10 User Controls Front Panel Controls No. / Icon MENU Control Menu button Function To pop up the OSD menus. Select- To select the adjustment items from OSD menus. Auto- To activate the Auto Adjustment function to obtain an optimum image. Decreases the brightness of the display image. Decreases value of the adjustment items. Increases the brightness of the display image. Increases value of the adjustment items. Switches on/off the power of the LCD display. Green indicates the display is turned on. Amber indicates the display in power-saving mode. SELECT/AUTO Select/Auto 3 Brightness Minus/Minus 4 Brightness Plus/Plus Power Switch Power LED 11 How to Use the OSD Menus 1. Press the Menu button to pop up the on-screen menu and to select between the four Main Menus. Choose the adjustment items by pressing the Select/Auto button. Adjust the value of the adjustment items by pressing the 3 or 4 button. Once you dont operate the OSD menus after a pre-set time, the OSD menus will automatically disappear. 12 On-Screen Display Menus First OSD Menu: Main Menu Page 1 Auto-Adjustment Contrast Horizontal Position Vertical Position Frequency Tracking No Yes 4 Auto-Adjustment Choose this function to obtain an optimum image. 4 Contrast Adjusts the contrast of the display image. 4 Horizontal Position Changes the horizontal position of the image. 4 Vertical Position Changes the vertical position of the image. 4 Frequency Changes the display data frequency to match the frequency of your graphic card. When you are experiencing vertical flickering bar, use this function to make an adjustment. 4 Tracking Synchronizes the signal timing of the display to that of the graphic card. When you are experiencing unstable to flickering image, use this function to make an adjustment. 13 Second OSD Menu: Main Menu Page 2 Display Mode OSD Off-Time Language Text-Graphic Sharpness Reset 1280* 1024 FH: 80 kHz (+) + FV: 75 Hz (+) + 4 Display Mode Selects this function to demonstrate the display resolution, vertical refresh, and horizontal scan of the current mode. 4 OSD Off-Time Adjusts the time period for OSD menu to disappear. 4 Language Chooses the language you need. 4 Text-Graphic Toggles between VGA text mode (mode M03H) and graphic mode (mode M13H). 4 Sharpness Adjust the sharpness of the image. 4 Reset Returns the display parameters of the current mode to its factory default settings. 14 Third OSD Menu: Main Menu Page 3 Vo l u m e Mute - 0 20 40 + 4 Volume 4 Mute It allows you to control the volume sound. It allows you to disable the sound immediately. 15 Fourth OSD Menu: Main Menu Page 4 Setting Adjustment-Red Adjustment-Green Adjustment-Blue Color Color Color Color 9300K 6500K Preset Custom 4 Color Setting Adjusts the color temperature. 4 Color Adjustment-Red It allows you to adjust the red color of the display. 4 Color Adjustment-Green 4 Color Adjustment-Blue It allows you to adjust the green color of the display. It allows you to adjust the blue color of the display. 16 Appendix Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. [. . . ] Insert the CD-ROM in your computers CD-ROM drive. Follow the directions on screen to complete the driver setup for your version of Windows. * If the AutoStart feature is not active: 1. Click the Browse button to locate the touch. exe program on the CD-ROM. [. . . ]