User manual PLANAR XP17W PRODUCT MANUAL

[. . . ] 7 Table of Contents Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 1 Important Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 2 Important Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 3 Product Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 4 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Unplug this product from AC outlet and remove batteries from IR control, when this product is left unused for a long time. 1. 3 Product Functions With the advanced video processing technology, the TV composite VIDEO, S-VIDEO signal can be displayed on PC monitor. Double scan conversion (15. 75 KHz to 31. 5 KHz). With built-in audio loop, the audio signal coming from PC can pass through to PC speakers at any circumstance. Built-in TV tuner for receiving terrestrial or cable TV. Easy operation - With one button to switch signals coming from composite VIDEO, S-VIDEO, COMPONENT VIDEO, CABLE/TV or PC. Automatic channel scan to detect the program channels. On screen display operation with IR remote controller. (Available in North America & Taiwan market. ) 1. 4 Package Contents As you unpack the product, please make sure the following items were included. If any of these items are missing, call your local agencies. Main body x1 Audio cable x1 IR control x1 Power supply x1 User manual x1 Power cord x1 VGA cable x1 AAA batteries x2 1. 5 Pull down the base When you open the box to take the product out then pull down the base first (See figure 1-1) Figure 1-1 1. 6 Viewing Angle Adjustment This product is designed to allow users to have a comfortable viewing angle. The viewing angle can be adjusted from -5°to +25°. (See Figure 1-5). Figure 1-5 3 When you want to close the base and body to 90°, you need to release a button from 25°. 1-6) Figure 1-6 Warning: Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in damaging the Monitor and Monitor stand. 1. 7 Detaching main body from Its Stand 1. Remove the rear cover from neck (See Figure 1-7) 2. Remove the stand from main body Figure 1-7 1. 8 Interface for Arm Applications Before installing to mounting device, please refer to Fig. 1-7 The rear of this LCD display has four integrated 4 mm, 0. 7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-8. These specifications meet the VESA Flat Panel Monitor Physical Mounting Interface Standard (paragraphs 2. 1 and 2. 1. 3, version 1, dated 13 November 1997). Note :Please using Ø 4mm x 8mm (L) screw for this application. Figure 1-8 4 Chapter 2 Installation 2. 1 Product Outward 2. 1. 1 Front view of main body Figure 2-1 Figure 2-2 1 2 3 4 5 6 7 Indicator for Power IR receiver Power Menu Channel Volume Source LED lights Green color --- Power is ON. LED lights Orange --- Monitor is in "Power Saving Mode". Select the next lower channel / higher channel (TV/AV mode) ; OSD function for selecting (PC mode). Lower / Raise the sound volume (TV/AV mode) ; OSD function for adjusting (PC mode). Selection CABLE/TV, AV-1(S ­VIDEO), AV-2(C-VIDEO) or PC. 2. 1. 2 Rear view of main body Figure 2-3 1 2 3 4 5 6 7 RF in VGA input AV2-in AV1-in Phone in DC in Kensington Lock hole Please connect to antenna or cable TV signal. [. . . ] (typical) Vertical: -80° ~ +80° Horizontal: -80° ~ +80° 16. 7M with FRC or Dithering Analog RGB 0. 7Vp-p Display colors Video Input Signal Input Impedance Polarity Amplitude Multi-mode Supported 75 Ohm ± 2% Positive, Negative 0 - 0. 7 ± 0. 05 Vp Horizontal Frequency: 30 ~ 60 KHz Vertical Frequency: 50 ~ 75 Hz 2. 5W, 4. 5 OHM On/Off switch with LED indicator Digital Digital Digital Digital Digital Digital Use EEPROM to save settings in memory 20 characters x 9 rows Power Consumption* 75W maximum 5W maximum 5W maximum AC Input 240 VAC 240 VAC 240 VAC Speaker Control Power switch (hard and soft types) OSD Brightness Contrast Horizontal Position Vertical Position Phase Clock Display Mode Setup OSD Format Power Management LED Color Green Orange Dark Orange: Standby, Suspend, Off Disconnected 5W maximum 240 VAC Dark: DC Power off * Meeting VESA DPMS requirements measured from AC Input end of AC power cord. Mode On Off Soft switch off 11 Sync Input Signal Polarity Separate TTL compatible horizontal and vertical synchronization Positive and negative Supports VESA DDC1 and DDC2B functions AC socket 1. 5M with 15-pin D-sub connector 1. 5M with Stereo Jack Temperature Relative Humidity Temperature Relative Humidity 5°C to 40°C/41°F to 104°F 20% to 85% -20°C to 60° C/-4°F to140° F 5% to 85% Plug & Play External Connection Power Input (AC input) Video Cable Audio Cable Environment Operating Condition: Storage Condition: Power Supply (AC Input) Input Voltage Input Current Single phase, 100 ~ 240VAC, 50 / 60 Hz 1. 2 A maximum 6 Pin Assignment Signal PIN 1 11 Signal PIN 9 10 11 12 13 14 15 Description +5V Hot Plug Detect NC SDA H. SCL Description Red Green Blue NC Digital GND Red Rtn Green Rtn Blue Rtn 5 15 1 2 3 4 5 6 7 8 10 12 4. 2 Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. Mode Resolution Total Nominal Sync Frequency Polarity (KHz) Horizontal Nominal Sync Freq. Polarity (Hz) Vertical 59. 940 72. 809 75. 00 56. 250 60. 317 72. 188 75. 000 60. 004 70. 069 75. 029 70. 087 70. 087 N N N N/P P P P N N P P N Nominal Pixel Clock (MHz) 25. 175 31. 500 31. 500 36. 000 40. 000 50. 000 49. 500 65. 000 75. 000 78. 750 28. 322 25. 175 VESA MODES VGA 640x480@60Hz 640x480@72Hz 640x480@75Hz 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 720x400@70Hz 640x350@70Hz 800 x 525 832 x 520 840 x 500 1024 x 625 1056 x 628 1040 x 666 1056x625 1344x806 1328x806 1312x800 31. 469 37. 861 37. 500 35. 156 37. 879 48. 077 46. 875 48. 363 56. 476 60. 023 IBM MODES 900 x 449 31. 469 800 x 449 31. 469 N N N N/P P P P N N P N P SVGA XGA DOS* DOS Note: When the in put display mode is not 1280 x 768, the image is smoothly expanded to 1280 x 768 dots with the scaling engine. [. . . ]