User manual PLANTRONICS CS361

[. . . ] WARRANTY Limited Warranty · This warranty covers defects in materials and workmanship of products manufactured, sold or certified by Plantronics which were purchased and used in the United States. · This warranty lasts for one year from the date of purchase of the products. · This warranty extends to you only if you are the end user with the original purchase receipt. · We will, at our option, repair or replace the products that do not conform to the warranty. [. . . ] I cannot hear all cords and jacks are connected correctly. I cannot hear · Check that· Check that all cords and jacks are connected correctly. the base has power (red indicator light) and the headset caller/dial tone. · Check that· Check that the base has power (red indicator light) and the headset battery is fully charged. battery is fully · Try other phone configuration dial settings on the base unit. Ensure · Try other phone configuration dial settings on the base the selected the selected number is in position indicator. number is in line with the line with the position indicator. · Ensure you are in headset mode. Press thebutton to button to · Ensure you are in headset the call control call control select correct mode. The talk indicatortalk indicator lightis green. The light on the base on the base is green. TROUBLESHOOTING Problem Problem Solution Solution Sound in handset is handset Reduce speaking volume by changing by changing the speaking volume · is Sound in · Reduce speaking volume the speaking volume major distorted/hear echo in major adjust switch page 15. distorted/hear echo in adjust switch setting. · Point microphonemicrophone towards your chin. · Listening volume too high on phone. Ifhas aphone has a handset · Listening volume too high your phone your handset volume control, lower this until thethis until the distortion disappears. volume control, lower distortion disappears. · If the distortion is distortion is still present, lower the listening volume adjust · If the still present, lower the listening volume adjust button on the headset. the headset. If the distortion persists, select another button on If the distortion persists, select another listening volume major adjust switch setting. listening volume major adjust switch page 14. · Base is too close to computerto computer orpage 9 for page 9 for · Base is too close or phone. proper · System needs to be reset. Perform system reset as described described · System needs to be reset. Lower the speaking volume by I can hear too much too much Speaking volume is too the speaking volume by I can hear background conversation, adjusting the speaking volume minor adjust buttons on the base. on the base. [. . . ] In most, but not all areas, the sum of the RENs should not exceed five (5. 0). To be certain of the number of devices you may connect to your line, as determined by the REN, contact your local telephone company. For product approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ### are the REN without the decimal point. [. . . ]