User manual PLANTRONICS CS70 WIRELESS HEADSET SYSTEM

[. . . ] If you have large hands, you may want to ask someone with smaller fingers to do this step. Plug the AC charger into an outlet and into the bases' AC charging jack. Anslut laddaren till ett nätuttag och till basenhetens laddningsuttag. Plug handset lifter power cord into handset lifter jack on base. [. . . ] nOTE: Only the last paired headset will work with the base. On a call) when enabling or disabling this function. to disable the multi-shift pairing feature , long press (5 sec. ) the speaking volume minor adjust down button until the power indicator light flashes. Without Handset lifter To make a call: 1. Dial tone should sound through handset (if not, check compatibility--see page 42). The talk indicator lights on both the base and the headset should come on, indicating a successful link. Press the call control button on the headset to answer a call. To end a call: Press the call control button on the headset, then hang up the handset. NOTE: If either you or the recipient have trouble hearing, please check compatibility (page 42). To first test proper set up of the handset lifter: 1. Press the call control button on headset to activate handset lifter and lift handset from phone. If you still do not hear a dial tone, you may need to insert extender arm (see page 61) or check compatibility (page 42). Press the call control button to raise the handset lifter. Use the telephone keypad to dial the number. To end a call, press the call control button to lower the handset lifter. NOTE: If either you or the recipient have trouble hearing, please check compatibility (page 42). NOTE: The compatibility setting of "1" is set at the factory to work with most phones. However, if you do not hear a dial tone, if either you or the recipient is having trouble hearing, or if you experience buzzing/hissing, please follow the directions below. If you cannot hear a dial tone through your headset, use a coin or small screwdriver to turn the telephone configuration dial until you can. [. . . ] Extender Arm Use extender arm when the handset lifter needs additional stability lifting and returning to cradle. Stabilisers ( a ) can be shifted left and right. Ringer Microphone Use ringer microphone when the telephone speaker is not located directly under the handset. Remove cover from ringer microphone jack on back of lifter. [. . . ]