User manual PLANTRONICS DISCOVERY 610

[. . . ] Before getting started, please review the safety booklet included in your package. For additional help, service or support information, refer to your product warranty card or visit www. Om du vill ha ytterligare information om hjälp, service eller support läser du på garantisedeln eller går till vår hemsida på www. Headset Headset status indicator Call control button (on/off) Volume/mute button Optional ear stabiliser Soft gel ear tip a. [. . . ] Your headset is now linked to your phone. En Fitting YoUr HEaDsEt The headset comes with three soft gel ear tips and an optional ear stabilizer. The medium sized ear tip is installed for wearing on the right ear. Twist the ear tip to the right for left ear wearing. Place the headset into your ear with the elongated side of the ear tip pointing up and forward. If the fit is not comfortable, either too tight or too loose, remove the ear tip from the headset by turning the ear tip to the neutral* position and pulling the ear tip away from the headset. Next, select the ear tip size that fits most comfortably in your ear. Hold the ear tip with the elongated edge pointing down and push the ear tip post into the opening on the headset. Twist the ear tip to the left for right ear wearing or to the right for left ear wearing. Place the headset into your ear with the elongated side pointing up and forward. USInG ThE oPTIonAL EAR STABILIZER The ear tip stabilizer may be attached to the headset to improve stability. Remove the ear tip from the headset by turning the ear tip to the centre or neutral position* and pulling the ear tip away from the headset. To answer a call, briefly press the call control button or the volume/mute button. To answer or end a call, press the call control button. aDJUsting tHE VolUME To increase the listening volume of the headset , press the upper end (+) of the volume/mute button. To decrease the listening volume, press the lower end (-). WARNING: Do not use headphones/headsets at high volumes for an extended period of time. Last nUMBEr rEDial To activate last number redial, double click the call control button. You will hear a high tone for each key press. NOTE: Last number redial must be supported by your device or mobile phone provider. En Using tHE MUtE To turn the mute on whilst on a call, press both sides of the volume/mute button simultaneously until you hear a beep. To turn the mute off, press both buttons again. [. . . ] WARNING: Do not use headphones/headsets at high volumes for an extended period of time. To activate last number redial, double click the call control button. You will hear a high tone for each key press. NOTE: Last number redial must be supported by your device or mobile phone provider. [. . . ]