User manual PLANTRONICS M100I

[. . . ] READY Activate the Bluetooth feature on your phone, then use the phone's settings to add/search/discover new Bluetooth devices. iPhone: Settings > General > Bluetooth>On (starts the search for devices) BlackBerrysmartphone®: Settings/ options > Bluetooth: On > Search for devices VIDEO TUTORIAL IN USA: www. plantronics. com/pairing 2. SET FirstTime: With headset turned off, activate Bluetooth pairing mode by sliding Power switch on. [. . . ] The loop on the gel eartip should point away from the headset. (Do not rotate the eartip too far. ) ForLeftEar ForRightEar MIX AND MATCH FOR BEST FIT If the gel eartip feels loose or tight in your ear, then change it. To replace the medium gel eartip for small or large, pull the loop of the gel eartip to remove it. (Don't pull on the speaker base and stem. ) Using your thumb, tuck the bottom of the eartip over the speaker and pull the loop of the eartip over the speaker. (Don't push the speaker through the gel eartip. ) If you aren't familiar with this style of gel eartip, clip on the earloop to the stem for extra stability. VIDEO TUTORIAL: www. plantronics. com/M100fit MORE ABOUT MULTIPOINT Plantronics M100 supports multipoint How to Initiate a Call technology, which allows you to use one When multipoint is on, the headset controls initiates or redials a call from headset with two different Bluetooth mobile phones. the phone that last made an outgoing call. To pair your headset to a second phone, see "Connect to Your Phone. " To use the second paired phone instead, make the call using the controls on that phone. The second phone activates its link with the headset. NOTE: The headset cannot place a current call on hold while answering a call from the second phone. How to Answer a Call While Talking on the Other Paired Phone To answer a second call on the other phone, the current call must be terminated or transferred back to the first phone. To transfer the call, see "Take a Good Look. " If you choose not to answer, the second call will go to voice mail. Answeringanincomingcallfrom thesecondphone, whilealreadyon anothercall: 1. Before answering the second call, end the first call by tapping the Call button. Answer the second call by tapping the Call button again. TIP To avoid issues with Multipoint, use the Call button on the headset rather than your phone controls. LISTEN TO THE VOICE This headset whispers various status alerts when you power on/off, run low on talk time, or lose/reconnect the Bluetooth connection to your phone. WHAT YOU'LL HEAR PowerOn PowerOff TalkTime:(5hrs, 4hrs, 3hrs, 2hrs, 1hr) BatteryLow RechargeHeadset Phone1Connected Phone2Connected Pairing PairingSuccessful PairingIncomplete, RestartHeadset VolumeMaximum MuteOn MuteOff LostConnection MultipointOn MultipointOff WHEN YOU'LL HEAR IT After sliding the Power switch to "on" position After sliding the Power switch to "off" position After sliding the Power switch to "on" position When you have approximately 30 minutes left before the battery must be recharged When you have approximately 15 minutes left before the battery must be recharged After sliding the Power switch to "on" position or reconnecting a dropped Bluetooth connection After pairing a second phone using multipoint feature While the headset and phone are trying to pair/connect After the headset and phone are successfully paired/ connected After the headset and phone tried to pair but failed When the highest volume level is reached after tapping Volume button After pressing Volume button for 1 second during a call When on mute, after pressing Volume button for 1 second When the phone loses the Bluetooth connection with the headset After activating the feature by pressing Call button while sliding the Power switch to "on" position After deactivating the feature by pressing Call button while sliding the Power switch to "off" position TIPS Pair/Connect Just Once Pairing is a one-time process unless your phone loses the connection or you want to pair a new phone. Watch for Flashing Red LED This headset will visually warn you when your battery is low and needs to be recharged. [. . . ] Sound Your Best: For best voice pickup, always check that the headset points towards the corner of your mouth. SPECIFICATIONS TalkTime StandbyTime OperatingDistance(Range) HeadsetWeight HeadsetDimensions ChargeConnector BatteryType ChargeTime(Maximum) PowerRequirements BluetoothVersion BluetoothProfiles OperatingTemperature StorageTemperature ChargingTemperature Up to 6 hours Up to 10 Days Up to 33 feet (10 meters), Class II 9 grams 55 x 18. 5 x 8. 1 mm Micro USB charging Rechargeable non-replaceable lithium ion polymer 90 minutes for full 5V DC ­ 180mA 2. 1 specifications with EDR Hands-Free (HFP) Profile 1. 5 and Headset (HSP) Profile 1. 1 32°F - 104°F (0 - 40°C) 32°F - 104°F (0 - 40°C) 32°F - 104°F (0 - 40°C) NEED MORE HELP? 24-hour support in USA: 1-866-363-BLUE (2583) FAQs: www. plantronics. com/M100faq 1-year limited warranty details: www. plantronics. com/warranty © 2010 Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. [. . . ]