User manual PLANTRONICS MX10

[. . . ] Power is not required for: · Two AA alkaline batteries (not included) may also be used, but batteries will need to be replaced frequently. You will hear three "beeps" through the headset when the batteries are low. Unplug your telephone's handset cord from the telephone base. Plug your telephone's handset cord into the Switcher amplifier handset jack ( ). [. . . ] Making and Receiving Calls with a Handset Note: Do not assume the caller cannot hear you. Some soundcards have "local loop back, " which means that the caller can hear what you are saying through the computer. Try a test call first and check this feature with your soundcard. Making and Receiving Calls while Listening to an Audio Device Use the phone handset as you normally would. To listen to both your telephone and your computer, depress the Telephone/Computer Audio Switch (colored indicator showing). To switch from talking to your telephone to talking to your computer, depress the Microphone Selection Switch (colored indicator showing). You may need to adjust your soundcard volume settings for optimum performance. 3 To interrupt or take over the phone call, simply release the Microphone Selection Switch (no colored indicator showing). Note: Some computer soundcards have "local loop back, " which means your callers can hear what you're saying. Do not assume that your caller can not hear you. Depress the Telephone/Computer Audio Switch (colored indicator showing) and make sure the rest of your settings are in default. Record using your external audio device. Your side of the conversation may be quiet depending on the make and style of your phone. If you are using an AC Power Supply, confirm that it is plugged in and the power outlet is turned on. If you are using batteries, confirm that they are good and placed in the battery compartment correctly. confirm that the Headset/Handset Selector Switch is switched to Headset ( ). Confirm that you have lifted the telephone handset out of the cradle. Confirm that the telephone handset cable and the short curly cord to the telephone are connected in the correct jacks (see Part 1 of this guide). Confirm that the Telephone/Amplifier Compatibility Switch is in the correct setting for your phone (see "Set the Telephone/Amplifier Compatibility Switch" on page 4). You may want to try moving the switch through all of the positions until you hear a clear dial tone. Experimenting with various switch settings will not harm the amplifier or your phone. Make sure the microphone of your headset is positioned in front or near your mouth. [. . . ] Name and telephone number of person to call, should contact be necessary 6. Reason for return and description of the problem Damage occurring during shipment is deemed the responsibility of the carrier, and claims should be made directly with the carrier. In addition to providing telephone access, your Headset Switcher Amplifier lets you use your Plantronics headset to listen to music from your computer or other audio source. This extra versatility carries with it the need to consider how you set your listening level. [. . . ]