User manual PLANTRONICS TRISTAR

[. . . ] 1 Select one of the four earpieces and insert it into the receiver, aligning the pins with the notches. Rotate the earpiece clockwise, 1/4 turn, until it clicks into place. 2 Try all four earpieces until you find one that comfortably rests against, but does not enter, your ear canal. [. . . ] Make sure the front of the microphone faces your mouth. If necessary, carefully rotate the microphone into the proper position. 9 To temporarily move the Noise-Cancelling microphone boom away from your mouth, rotate the boom grip. To return the boom to it's original position reverse the rotation. 10 The Polaris and StarBase headset models are fitted with a standard modular connector. To use the Polaris and StarBase headset models, simply insert into the headset port of a compatible telephone. 11The clothing clip keeps the headset properly seated and free from the cord's weight. 12 Some headset models are equipped with a Quick Disconnect connector. When you separate the Quick Disconnect, you place an ongoing conversation on 'hold' without removing the headset. Before using your headset, join the Quick Disconnect to the mating connector of your adapter cable. To put your call on 'hold', grasp the Quick Disconnect, as shown, and pull straight apart. To resume your conversation, reconnect the two halves. 13 If you are using a DECT or GSM telephone, plug the 2. 5mm connector into the headset port of the telephone or adapter. Callers cannot hear me properly For Voice Tube models, determine if the voice tube is clogged or positioned improperly. For Noise Cancelling models, make sure the microphone is facing your mouth and positioned properly. [. . . ] For further information on setting your M12 adapter, please refer to your M12 User Guide. Clean cable with a moist cloth once a month. 13 Om du anväder en GSM eller DECT telefon, anslut 2, 5mm pluggen antingen till telefonens headsetuttag eller till en adapter. [. . . ]