User manual PLEXTOR 241024U

[. . . ] Model PX-S2410TU (External) INSTALLATION AND USERS MANUAL SLIMLINE USB CD-R/RW DRIVE JANUARY 2003 Plextor reserves the right to make improvements in the products described in this manual at any time without prior notice. Specifications are subject to change without notice. Plextor makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. reserves the right to revise this manual and to make changes in its content without obligation to notify any person or organization of such revision or change. [. . . ] You can write to high speed CD-RW discs only on drives that support this new media. Drives that are capable of writing to high speed CD-RW media, such as the PlexWriter 24/10/24U, are identified by a "Compact Disc ReWritable High Speed" logo. PlexWriter 24/10/24U Installation and Users Manual 11 Section 3. Using Your PlexWriter Installing Device Drivers and Application Software In Windows, your PlexWriter acts as a "CD-ROM Drive" for purposes of installation and setup. In some cases, you will need to install additional software to make use of all of the features of the PlexWriter. · Using the PlexWriter on a PC: Y As CD-ROM: The computer's operating system, whether it is Windows XP, Windows 2000, or Windows Me, supplies a generic USB device driver that allows the PlexWriter to function as a standard CD-ROM drive. You don't need to install anything else. If you have Windows 98SE, you need to install a special USB driver. You'll find this driver on the Plextor Setup Disc, or you can get it from the Plextor web site at http://www. plextor. com. (Follow the links from the home page to Support\Downloads\Drivers. ) Y As a CD-R or CD-RW device: In order to write to CD-R or CD-RW media, you will need additional software such as SimpliCD® or Easy CD CreatorTM. If you purchased a kit from Plextor, this software is supplied. · Using the PlexWriter on a Macintosh: Y Whether using the PlexWriter as a standard CD-ROM or as a CD-R or CD-RW device, you will need additional drivers or software besides those that are part of the Macintosh operating system. You will need to purchase this software separately. The software compatibility list is available from Plextor's web site at www. plextor. com. Before installing any software, check that the USB cable connection between your PlexWriter and the computer is correct, and the PlexWriter is recognized by your system. 12 PlexWriter 24/10/24U Installation and Users Manual Section 3. Using Your PlexWriter Tray Loading and Operation To put a disc in the tray: 1. While the PlexWriter drive is powered up, push the eject button on the front panel. The disc tray slides out in a few seconds. Pull the disc tray to open it all the way. Figure 4: Opening the Disc Tray 3. Lay a blank CD in the tray, label side up. Press the center of the disc to secure it to the drive spindle. CAUTION: Do not press so hard that you damage the PlexWriter drive. And be careful not to touch the drive's pickup lens. PlexWriter 24/10/24U Installation and Users Manual 13 Section 3. Using Your PlexWriter Figure 5: Open the Tray Fully; Press On the Disc to Lock It Onto the Spindle 4. Press the tray to close it. NOTE: Always close the tray by pressing the front of the drawer by hand in a smooth and secure manner. To remove a disc from the tray: 1. [. . . ] Fill out the RMA Request Form, include the Tech Support Ticket Number, and e-mail or fax the form to Plextor to request an RMA number. IMPORTANT NOTE: The RMA form will not be processed without the Tech Support Ticket Number. 4. Plextor then sends you the RMA form with the RMA number and shipping information included. When you receive the RMA number, pack the Plextor drive securely in a box, and include the RMA form as a packing slip. Write the RMA number in large letters on the outside of the box, and ship the box and the drive to Plextor. 32 PlexWriter 24/10/24U Installation and Users Manual Appendix B: Technical Support Contacting Plextor's RMA Department You can contact our RMA Department and request RMA forms at: · rmasupport@plextor. com · Or by fax at 510-651-9765 · Or by calling us at 800-886-3935 Packing Your Drive Check the drive to make sure there is no disc inside, and if possible, pack your drive in the original box. [. . . ]