User manual PLEXTOR PL-MAN1

[. . . ] CD-ROM Drive Operation Manual PX-43CH Internal CD-ROM Drive PX-45CH External CD-ROM Drive FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee interference will not occur in a particular installation. [. . . ] See Chapter 11 for tips on handling and cleaning CD-ROM discs. # Do not attempt to open the drive and service it yourself. Removing the cover may expose you to harmful electrical voltages or the laser beam. For your safety, entrust service to Plextor-authorized service personnel only. Only CD-ROM discs carrying this label may be used with this drive: 8 PX-43CH/PX-45CH OPERATION MANUAL ---- CHAPTER 5 ---- Drive Features YOUR TASK: YOUR OBJECTIVE: Get to know your drive. Learn how to operate different features of the drive. Learn some terms that will be used elsewhere in the manual. Match the different parts of your drive to the diagrams below. YOUR METHOD: PX-43CH Internal Drive Front Panel Door Closed Front Door Caddy Slot Eject Button Volume Control Emergency Eject Button ON/BUSY Indicator Headphone Jack DISC IN Indicator Front Door: Open to insert caddy. Eject Button: Push to eject caddy. ON/BUSY Indicator: Yellow when power is on. Flashing when disc is inserted and being accessed. Off when disc is inserted and not being accessed. DISC IN Indicator: Green when power is on and disc is inserted. Off if no disc is inserted. PX-43CH/PX-45CH OPERATION MANUAL 9 CHAPTER 5 ---- Drive Features Volume Control: Controls volume of headphone jack. This control has no effect on the rear panel audio outputs. Headphone Jack: Stereo mini-jack for headphones and powered speakers. Eject Hole: Insert paper clip or other thin, rigid object to eject caddy does not work. Turn off power before using this feature. Caddy Emergency if automatic eject button PX-43CH Internal Drive Rear Panel Audio Output Connector SCSI Interface Connector Jumpers Power Connector Audio Output Connector: Outputs stereo analog signal. Use to connect to sound board or audio amplifier. SCSI Interface Connector: Connects to SCSI interface board using 50-pin to 50-pin flat ribbon SCSI cable. Jumpers: Use to select SCSI ID number, parity, auto, test, block size and eject lock options. Leave these jumpers at their factory settings unless one or more of the following situations pertain to you: SCSI ID number: If you are using more than one SCSI peripheral, you may have to change your SCSI ID number. Block size: If you are working in a UNIX environment and want to boot from your CD-ROM drive, see page 17. Eject lock: If you work in an environment where you need to prevent others from easily removing a CD-ROM disc from your drive, see page 17. Power Connector: Connects to your computer's power supply (DC +5V and +12V). 10 PX-43CH/PX-45CH OPERATION MANUAL CHAPTER 5 ---- Drive Features PX-45CH External Drive Front Panel Door Closed Front Door Caddy Slot Eject Button Volume Control Emergency Eject Button ON/BUSY Indicator Headphone Jack DISC IN Indicator Front Door: Open to insert caddy. Volume Control: Controls volume of headphone jack. This control has no effect on the rear-panel audio outputs. [. . . ] You may override this feature and set your drive to operate only at single speed (150KB/sec) by setting the AUTO switch/jumper OFF. At this setting, the drive will transfer both data and audio at 150KB/sec. We recommend that you set this switch/jumper OFF only under extreme circumstances (e. g. , you have a badly damaged disc that you MUST get data from). Test Block Eject Leave this OFF. Leave this OFF unless you are working in an UNIX environment and want to boot from your CD-ROM drive. [. . . ]