Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PLEXTOR PX-755. We hope that this PLEXTOR PX-755 user guide will be useful to you.
Lastmanuals help download the user guide PLEXTOR PX-755.
Detailed instructions for use are in the User's Guide.
[. . . ] Model PX-755SA Internal SATA Drive
DVD±R DL (DOUBLE LAYER/DUAL LAYER), DVD±R/RW, CD-R/RW DRIVE
INSTALLATION AND USERS MANUAL
MARCH 2006
Plextor reserves the right to make improvements in the products described in this manual at any time without prior notice. Plextor makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. reserves the right to revise this manual and to make changes in its content without obligation to notify any person or organization of such revision or change. This manual is copyrighted, all rights reserved. [. . . ] When picking up or holding blank media you can either place your fingers along the outer edge of the disc, or place one finger through the center hole and one finger on the outer edge. Once you have finished creating a disc, label it by writing on the top using permanent ink.
CAUTION: We recommend using a "non-toxic" marker, such as a Sharpie pen, that conforms to the ASTM D-4236 standard. Some permanent markers will damage the media. Also, do not press too hard when writing on the disc.
PX-755SA Installation and Users Manual
21
Section 3. Using Your PX-755SA
NOTE: We do not recommend placing self-sticking CD-R labels on the disc. The weight of the label may unbalance the disc and cause write errors during recording or read errors during reading. Also, attempting to remove the label may permanently damage the disc.
Cleaning Discs
For proper read and write performance, your discs must be clean. Trying to record on a dirty disc may result in a failed session and ruin the disc. To clean the disc, wipe the disc using a clean, soft cotton cloth to remove surface dirt such as fingerprints. Use a straight-line motion, wiping from the center out. Do not wipe the disc in a circular motion.
Figure 11: Wipe the disc from the center outward
HINT: Keep your frequently used discs in jewel cases at all times to prevent them from becoming dirty or damaged.
22
PX-755SA Installation and Users Manual
Section 3. Using Your PX-755SA
Mounting Position
You can operate your PX-755SA drive in either a horizontal or a vertical position.
Playing DVDs
To play a digital video disc, insert the DVD as you would any other disc. The drive plays both single layer and double layer discs. The first time: A code on each DVD allows it to be played only on players designed for a certain regional area, such as North America, Europe, etc. When the drive ships from the factory there is no region code set. The first time a DVD that has a region setting is inserted into the drive, the drive is automatically set to that region code. If you later insert a DVD with a different region code, you are prompted to either accept changing the new region code or not. If you don't accept the change, then that DVD will not play. If you do accept the change, then the region code setting is changed. But remember: you can change the drive's region code only 5 times. After that, you can't change it any more.
Writing to DVD Media
You need special software that supports writing to DVD+R, DVD+R DL, and DVD+RW discs; or to DVD-R DL, DVD-R and DVD-RW discs.
Specifying +R/RW or -R/RW
You don't need to specify whether to write to +R/RW or -R/RW. The selection is automatically made for you, based on the media you insert in the drive.
PX-755SA Installation and Users Manual
23
Section 3. [. . . ] If the drive is determined to be defective, you will receive an RMA number. Plextor will e-mail you with the RMA number and shipping information. When you receive the RMA number, pack the Plextor drive securely in a box, and include the RMA number with the drive. Write the RMA number in large bold numbers on the outside of the box, and ship it to Plextor.
Contacting Plextor's RMA Department
You can contact our RMA Department and request RMA forms at: · rmasupport@plextor. com · Or by calling us at 1-800-204-0332 or 937-615-1610.
Packing Your Drive
Check the drive to make sure there is no disc inside, and if possible, pack your drive in the original box. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PLEXTOR PX-755
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PLEXTOR PX-755 will begin.