User manual PLUS BF-030WPP Operation Manual

[. . . ] OPERATION MANUAL BF-030SPP/WPP PLUS First of all, we would like to thank you very much for purchasing a Plus Copy board CONFERENCE MODEL. Please read this Operation Manual before using the machine to get the best performance out of the product. We recommend that you keep this manual for future reference. EXPLANATION OF UL REGULATORY LABEL (USA ONLY) PLEASE NOTE: The description "Computer Rooms" on the label located on the rear of the copyboard, refers to areas where an abundance of computer control equipment (such as high output servers) is being used, It does NOT refer to environments such as offices or classrooms where there are simply PC's being used. UL regulations require that we place a warning label in regard to this item being used in a "Computer Room". [. . . ] BF-030WPP: The copy is compressed horizontally. This key is used to make a print-out again after copying. If the PC On-Line lamp is lit, the Boardware software can be used to download the writing surface data to the PC. Used to move the writing surface to the left. When the key is pressed, it moves 1 page and stops automatically. If the key is pressed again while the writing surface is moving, it stops immediately. If this key is pressed during copying, the writing surface is stopped and the paper is ejected during printing. If the number of copies is set to multiple copies, the printer will eject the set number of page for the paper which were printed on up to the point when the stop key was pressed. See page 7 for the method of resetting the printer Do not turn the power switch OFF during printing. If the power switch is turned OFF by mistake during printing, this could cause a paper jam. This lamp is lit when the Boardware software is used and the unit is connected to a PC. 4 OPERATION The following is the explanation of operation assuming an HP LaserJet 6L is being used as the printer. If any other compatible printers are to be used, please see the operation manual for that particular. *Please see Page. 1 for compatible printers. Before Use Press the caster lock switches to set the casters to the lock position. Insert the power cord plug in the socket. The power lamp blinks 2-3 seconds and then remains lit (green). After all the lamps light on the printer front panel, the lamps immediately light in the order of data lamp (center), error lamp (top) and on-line lamp (bottom). If there is no paper in the unit, the error lamp (top) remains lit. Printer Display Lamps (HP LaserJet 6L) · Error (yellow) · Data (green) · Printing OK (green) Paper Insertion Pull up the paper support attached to the back of the printer paper feed tray. Up to 100 sheets can be inserted at a time. Make sure that no paper is protruding from the paper feed tray at this time. If paper is inserted in the paper feed tray, the on-line lamp (bottom) is lit. Use the paper guide to locate center the paper in the feed tray. [. . . ] The Stop key is disabled during printout. Be sure to set the correct number of copies. Moving the writing surface Moving with the keys. When the key is pressed, the writing surface moves to the left the equivalent of one page and then stops. If the Feed/Stop key is pressed during movement, the unit immediately stops. [. . . ]