User manual PLUS U5-512

[. . . ] DATA PROJECTOR User's Manual U N R E E M T E N E C A N C Y B D N TA S R G B V ID E O F R L E E Z (U5-532/U5-512) M O ZO 2 4 R E TIM / K L LIC E -C C R AN C TE U M IMPORTANT * DLPTM (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instruments Incorporated (U. S. A. ). * DMD is an ultra-precise part developed by Texas Instruments (U. S. A. ) which takes the place of liquid crystal (in the projector). * VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U. S. A. ). * S-VGA is a registered trademark of Video Electronics Standards Association. [. . . ] The setting contents are "Off" and from 10 to 60 minutes (in 10-minute intervals) Settings can also be made with the SELECT ( ) buttons. VOL 3 4 STANDBY MENU (2) CANCEL button (3) RGB ENTER VIDEO CANCEL QUICK Q FREEZE MUTE ECO AUTO (3) Press the ENTER button and start the timer. · The display of the timer setting will close, the display of the timer will appear and simultaneously the timer will start. Gauge (Blue) [Timer Display] The blue gauge indicates the remaining time. When the gauge disappears, the time is up. The gauge continues to be displayed when the timer is stopped. When the remaining time is "0" (Gray) · Press the ENTER button to restart the timer. The timer will start with the same time setting. · Press the CANCEL button to close the timer display. The timer setting will return to "Off". Moving the Position of the Timer Display The SELECT ( ) buttons on the remote control permit movement within the movable range of the timer display. 1 2 3 4 ASPECT VOL KSTN ZOOM TIMER (1) Movable Range of the Timer Display Note: * The timer display will be closed while the menu or the quick menu is displayed, and while a message is displayed; however, the timer will still be operating at such times. Also, the timer will not be displayed unless a signal is being input. * While the presentation timer is being displayed, screen movement will not be possible in the zoom mode. E-33 General Operation Using the Laser Pointer Applicable Projector: U5-632 The remote control unit's laser pointer can be used to point to the section currently being explained, making presentations more effective. CAUTION Do not look at the laser pointer's light source. Pointing the laser beam at the eyes could lead to reduced vision or vision impairment. · Never look at the laser pointer's light source. · Do not point the laser beam at people. · Do not let children use the laser pointer. This label is located on the side of the remote control. Operation The red laser beam is emitted from the tip of the remote control unit while the LASER button is pressed in. Point the remote control unit's transmitter in the direction you want to indicate. The laser beam turns off when you release your finger from the LASER button. S TA N D B Y R G B M E N U V ID E O A U TO Q U IC LA S E R E N TE R FR EE ZE / K L LIC E -C C R AN C Q K M U TE TIM 1 V O L E R 3 2 4 ZO O M LASER E-34 General Operation Performing Mouse Operations on the Computer with the Remote Control Unit Applicable Projector: U5-632 When a computer and the projector are connected, mouse operations can be performed on the computer using the projector's remote control unit. When projecting images from the computer, the projector can be operated and mouse operations on the computer performed with the same remote control unit, making for efficient presentations. Connecting the computer and projector Use the USB cable included with the projector to connect the computer's USB (type A) connector to the projector's MOUSE connector. Note: * Be sure to plug the cable in securely. * Depending on the type of connection, the computer's operating system, etc. , it may be necessary to change settings or restart the computer after making the connections. USB connector USB cable (mini B to A type) (Supplied item) Functions of the mouse function buttons When operating, point the remote control unit's transmitter towards the remote control sensor on the projector. L-CLICK button (on back) Press this to perform the left-click operation. LASER VIDEO AUTO STANDBY RGB MENU QUICK JOG buttons These move the computer's pointer in the corresponding direction. [. . . ] · If lamp has reached the end of its usable life, the lamp bulb may shatter. When this happens, an explosive sound can be heard and pieces of glass may be scattered in the lamp cartridge. Do not touch them as the pieces of glass may cause injury. If this happens, contact your dealer or the store the projector was purchased. E-64 Replacing the Lamp Cartridge Preparations: Turning the projector upside-down on top of a soft cloth, etc. , so that it does not get scratched makes it easier to replace the lamp cartridge. [. . . ]