User manual POGO RIPFLASH

[. . . ] Use RipFlash to record those quick voice reminder memos, or even lengthy business meetings or lectures. The RipFlash Recordable MP3 Player also works like any traditional MP3 player for listening to your existing MP3 files or files that you download from the Internet. Just use the supplied USB cable and software to move MP3 files from your computer to your RipFlash. Package Contents Check the contents of your RipFlash Recordable MP3 player against the list shown below. Contact the distributor from whom you purchased the player if any of the following items are missing. 1. Line-in cable RipFlashTM Recordable MP3 Player 1. [. . . ] *The Smart MediaTM Card cannot be inserted/removed while playing MP3 file(s). *To pause, press the [Play] key again (the "pause" icon on the LCD will blink) 2. To move to other tracks, press the [Forward] key or the [Rewind] key. 3. Stop/Escape To stop play of the current file or to escape from current menu, press the [Stop] key. 4. Forward/Rewind To switch tracks, press the [Forward] or the [Rewind] key until you reach the desired selection. MP3 Play mode 1. Repeat mode To select the [Repeat] mode, depress the [EQ/RPT] key for at least 2 seconds during the current selection. Stop after playing one track --------------------------Play one designated track repeatedly-------------------Stop after playing all tracks--------------------------Repeat all tracks----------------------------------Play all tracks at random----------------------------- RAND Play stored tracks, one after another per 10 seconds-------- INTRO Section repeat To repeat a selection press [Menu/A<->B] at the start point. When you get to the end of the portion you want to repeat, press the [Menu/A<->B] key again. The LCD will show A<->B and the selected portion will repeat until [Menu/ A<->B] is pressed again . Selecting the Equalize mode To change the equalize mode, press the [EQ/RPT] key, and select the desired [EQ] mode by pressing the [EQ/RPT] key while playing. The current equalize mode will be displayed at the top of LCD by icon. Volume control You can adjust the volume level with the volume key located on the left side of the player. Low battery alert If the battery is low or discharged the player will turn off automatically. How to record/play voice messages To record voice messages: To record voice messages into the internal/external memory, press the [Rec] key. The player will begin recording immediately and the recording time will be displayed on the LCD. *To see how much remaining record time is available, press the [Menu] key while recording. *To change internal recording to external recording, go to page ??REC location select mode. To replay voice messages To play recorded voice messages, press the [Play] key after selecting the desired track with the [Forward] or [Rewind] key. How to record/play using the "Line-in" (MP3 Recording) To record "Line-in" To encode MP3 in internal/external memory connect the line-in cable to the line-in jack on RipFlash and the other end (of the line-in cable) to the line-out jack of your audio source, then press the [REC] key. *If your audio source does not have a line out jack, then its possible to use the headphone jack but be sure to test the volume levels (too high of volume will cause distortions, too low of volume will create audio that is too quiet). To play a recorded track To playback MP3 recordings in internal/external memory, press the [Play] key after selecting the desired track with the [Forward] or [Rewind] key. How to interpret the menu *Press the [Menu] key (when not in playback mode). Use the [Forward] and [Rewind] keys to navigate through the menu system. Delete mode 2. Line-in encoding mode 3. VAD mode 4. Line-in of Bit rate mode 5. 6. Voice recording of Bit rate mode SL mode 7. SI/SE mode 8. REC location select mode 1. Delete mode Recordings can be deleted by pressing the [Play] key after making the selection with the [Volume] key. INT/EXT files can be deleted by pressing the [Play] key after selecting files with the [FF/Rewind] key. 2. Encoding mode The [1SYNC, SYNC, No icon] mode can be selected with the [FF/Rewind] key. Recording only one file------------------------------ 1 SYNC Recording one by one files until stop--------------------- SYNC Recording several files into one file until stop------------- No icon 3. [. . . ] A: Check the connection of the USB cable between the PC and RipFlash Recordable MP3 Player. Additionally, check the battery condition. Q: The Smart Media Card cannot be inserted or recognized. A: Make sure the SMC is fully (and correctly) inserted in the SMC slot. Q: `No code' is displayed on the LCD. A: The memory must be formatted (see instructions for formatting memory). Safety Precaution Before you use or store the RipFlash Recordable MP3 Player, please carefully follow the instructions shown below. 1. [. . . ]