User manual POLAROID ADS-1000

[. . . ] Portable DVD Player Docking Station ADS-1000 Operation Manual 20050324 Table of Contents Important Safety Instruction-------------------------------------------- 3 FCC Notice------------------------------------------------------------------- 5 Characteristic Features -------------------------------------------------- 6 Front View ------------------------------------------------------------------- 7 Rear Panel & Side Panel---------------------------------------------------- 8 Display Panel----------------------------------------------------------------- 9 Remote Control ----------------------------------------------------------- 10 Attaching & Detaching Portable DVD player---------------------- 13 System Connections----------------------------------------------------------- 14 TV Function --------------------------------------------------------------------- 17 AV Function --------------------------------------------------------------------- 21 Troubleshooting ------------------------------------------------------------- 22 Specifications ---------------------------------------------------------------- 23 -2- Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE. POWER SUPPLY: Connect the supplied adapter to the back of the Docking Station in the slot marked "DC 9. 5V IN". Plug the two-prong end of the power cord to an AC100-240V outlet. [. . . ] No obstacles may stand in the way between remote control and infrared sensor. Insert the battery into the receptacle. Make sure the polarity matches the marks inside the component. The batteries normally last for about six months. This depends on how often and for what operations the remote control is Insert the receptacle into the remote control. If the remote control unit fails to work even when it is operated near the player, replace the battery. If the remote control is not used for a long period of time, remove the battery from the compartment, to prevent damage by leakage. - 10 - Remote Control Remote Control Drawing - 11 - Remote Control 1. POWER button Press to access to or exit the STANDBY mode. AV1 button Press to shift to external AV1 input mode. AV2 button Press to shift to external AV2 input mode. Or press to adjust value in the picture setup menu. Press buttons to select channels forward and backward in TV mode. Or press to adjust the value of time when setting time on the display panel. MENU button Press to access the menu of current mode. 16:9/4:3 button Press to shift the aspect ratio between 16:9 and 4:3. 0-9 number buttons Select numbers by pressing these buttons. One-digit number: press the number button and press the ENT button or wait 2 seconds to confirm. Two-digit number: press the first number and input the second number in 2 seconds. Three-digit number: press the first number, then input the second number in 2 seconds, and input the third number in the next 2 seconds. CH DISP In TV mode, display the current channel information. CLOCK button Press once to display the time on the display panel. In standby status, the time is still displayed on the display panel. Press twice to set the time on the display panel. Use the buttons to select the editing position of hour or minute, use the buttons to adjust the value of the hour or minute upward and downward. [. . . ] Note: The function is active as long as the unit is continuously supplied with power. The unit will automatically play the selected input signal at the set start time and enter standby mode at the set end time each day. - 20 - AV Function AV Function The docking station has an additional AV input and output. When an AV source is connected, press the AV1 or AV2 button on the remote control to enter external AV mode. Picture Parameter Setup Press the MENU button once on remote control to enter PICTURE setup menu, and screen will display as shown: PICTURE BRIGHTNESS CONTRAST COLOR LANGUAGE RESET Exit 10 10 10 ENGLISH Use the buttons to select the item you want to set (Brightness, Contrast, Color). Use the , buttons to adjust the items between 0 and 20. [. . . ]