User manual POLAROID CZA-05300B

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Select [Single] or [All] with the / buttons, and press the OK button. Select [Cancel Protect] with the / buttons, and press the OK button. The removal of image protection is executed and the camera returns to the playback mode. Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of their protected status. EN-25 Erasing Images 1. Select the image you want to erase with the / buttons. Select [Single] or [All] with the / buttons, and press the OK button. [Single]: Erases the selected image or the last image. [All]: Erases all of the images except for the protected images. Select [Execute] with the / buttons, and press the OK button. To not erase, select [Cancel], and press the OK button. :Exit OK:Enter Deleting an image will not affect sequential image numbering. For example, if you delete image number 240, the next captured image will be numbered 241 even though 240 no longer exists. In other words, an image-number is retired when an image is deleted and will not be reused or reassigned to another subsequently captured image. When black text is highlighted green it is the command that will be executed when you press the OK button. For example, if [Cancel] is highlighted in green and you press the OK button you will not delete this picture. EN-26 INSTANT DIGITAL PRINTER FUNCTIONS AND FEATURES 1. Select [Print] with the / buttons, and press the OK button. Select the image that you want to print with the / buttons, and press the OK button. Press the button to exit the menu mode, and the camera returns to preview display. Setting the number of prints After selecting your image that you want to print, if you wish to change the print quantity, select [# Prints] on the print menu. Set the desired quantity with the / buttons. Press the OK button to start printing the selected image. After the printing process is complete, the camera returns to the main Print menu. If you wish to print multiple, different images do the following: a. Select [# Prints] by using the / buttons. Use the / buttons to select the number of prints for this image. [. . . ] [Print]:After all settings are configured, select this item to start printing. If you select [Images] in the previous step, the figure shown on the right hand side will appear. Select [Single] or [All] with the / buttons, and press the OK button. [Single]:Select to print one specific image. [. . . ]