User manual POLAROID FDM-1015

[. . . ] 10" Under-the-Cabinet LCD TV with DVD Player FDM-1015 User's Manual 20060302 Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE. CAUTION: Laser radiation when open. Do not stare into beam. POWER SUPPLY: Connect the supplied adapter to the side of the DVD player in the slot marked "Power In". [. . . ] There are two methods to organize the memorized stations: · Use the , buttons to adjust the channel number for your preference, and then press the SETUP/SET button again, the station will be memorized with the coded station number. · Press the SETUP/SET button again, the station will be automatically memorized with the default station number in sequence. You can store radio stations from 0 to 19, total 20FM or 20AM radio stations. If no buttons are pressed within 3 seconds of pressing the SETUP/SET button first time, the frequency will appear on the display panel again, and the station will not be stored. Accessing memorized radio stations · First use the number buttons on the remote control for input, then press the ENT button for confirmation to go to the selected radio station directly; Or without pressing any button and wait a moment, it also goes to the selected radio station. · Press the , buttons on the remote control or front panel to select the radio stations forward and backward. When selecting the stations, the "CH 00" will appear on the display panel, where the "00" is the channel number of the stored radio station. After a few seconds, the "CH 00" disappears and the radio frequency will be displayed once again. - 19 - TV Function Basic Operation Connect the antenna to the antenna jack on the rear panel. After connecting the antenna, connect the power supply cord. If the player is in standby mode, press the POWER button on the front panel to turn on the power. Press the TV button on the remote control to shift to TV mode. Press the , buttons on the remote control to select the desired channel. To go to a channel directly, first press the number buttons on the remote control for input and then press the ENT button for confirmation. You may also wait for a moment without pressing the ENT button and the unit will go to the selected channel. Some preferences can be preset: Picture Parameter Setup Press the SETUP/SET button once on the remote control to enter PICTURE setup menu, and screen display as shown: PICTURE BRIGHTNESS CONTRAST COLOR LANGUAGE RESET EXIT 10 10 10 ENGLISH TV SETUP Use the , buttons to select the item you want to set (Brightness, Contrast, Color). Use the , buttons to adjust, you can adjust the items between 0 and 20. Use the , buttons to select the Language, press the , buttons to select English, French or Spanish. To restore a setting to the original value, use the , buttons to select Reset, then press the ENT button to confirm the change. To exit the setup menu, first use the , buttons to highlight PICTURE, then press the button on the remote control. Press the button on the remote control to enter TV Setup menu. TV System Setup When the button is pressed, the TV system setup menu will appear: - 20 - TV Function TV SETUP SIGNAL CHANNEL SKIP BLUE SCREEN FINE TUNING AUTO MEMORY PICTURE CATV 002 OFF ON EXIT Use the , buttons to select the item you want to set. Use the , buttons to select the item and enter it. First use the , buttons to highlight the TV SETUP, then press the button on the remote control to exit from the setup menu, and press the button on the remote control to return to the PICTURE setup menu. [. . . ] Make sure the disc is loaded with label side up. Disc should be clean, not dirty or warped. Player's region code should be the same as the region code of the DVD disc. Make sure water condensation has not occurred. [. . . ]