User manual POLAROID FLM-1514SA

[. . . ] 15" LCD FLU-1514SA 20060928 Table Of Contents Important Safety Instructions------------------------------------------------ 2 Product Features ---------------------------------------------------------------- 4 Front Panel------------------------------------------------------------------------- 5 Rear Panel-------------------------------------------------------------------------- 6 Remote Control--------------------------------------------------------------------7 System Connections------------------------------------------------------------ 9 Connecting to External AV Signal Source------------------------------------9 Connecting to External AV Signal Source (COMPONENT)--------------10 Connecting to PC ------------------------------------------------------------------11 Connecting to Power Cable------------------------------------------------------12 Connecting to TV Signal --------------------------------------------------------- 13 TV Functions-----------------------------------------------------------------------14 Preparations-------------------------------------------------------------------------14 Image Setting------------------------------------------------------------------------14 Audio Setting-------------------------------------------------------------------------16 Timer Setting-------------------------------------------------------------------------17 Setup Setting------------------------------------------------------------------------17 NICAM Function------------------------------------------------------------------ 21 Other Functions------------------------------------------------------------------- 22 External AV Input Function-------------------------------------------------------22 Computer Screen Function------------------------------------------------------ 22 Troubleshooting------------------------------------------------------------------ 23 Specifications--------------------------------------------------------------------- 24 1 Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. CAUTION 1. In order to ensure the safety of the product, do not remove any cover and attempt to repair the unit. If any service is needed, please contact the distributor or its authorized service center. [. . . ] Note: The L/R audio input jacks can be used in the both COMPOSITE and S-VIDEO modes. -9- System Connections Connecting to External AV Signal Source (COMPONENT) Use the audio and video cables to connect the Component input jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then press the INPUT button to shift to COMPONENT mode. - 10 - System Connections Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit. Connect the other end to the PC audio output jack. Please set the PC's resolution at 1024x768@60Hz After connection, turn on the unit and the PC and then press the INPUT button to shift to VGA mode. - 11 - System Connections Connecting to Power Cable Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will not be used for a long time, disconnect the plug from the outlet. - 12 - System Connections Connecting to TV Signal This unit can be connected to the TV signal input source via the TV jack on the rear panel. After connection, turn on the power of the unit; press the INPUT button to shift to TV mode. After connecting to the antenna, turn on the unit, and go on with program searching, you can follow the below steps to select channels: 1. For 0~9 channel: Press the number buttons to select the channel X, it will go to the selected channel immediately. For 10~99 channel: Press the number buttons to select channel XX, and it will go to the selected channel immediately. * X is the channel number. - 13 - TV Function Preparations 1. After connection, press the POWER button to turn on the power. Press the INPUT button to shift to TV mode. You can go on with the following operations: Image Setting Note: This item is only available when there is a signal input. Press the MENU button to return to the previous menu. Volume Setup Press the button to select Volume and press the button to adjust the level. Press the MENU button to return to the previous menu. Bass Setup Press the button to select Bass and press the button to adjust the level. Press the MENU button to return to the previous menu. Treble Setup Press the button to select Treble and press the button to adjust the level. Press the MENU button to return to the previous menu. Balance Setup Press the button to select Balance and press the button to adjust the level. [. . . ] When receiving mono audio signals, press the STEREO/AUDIO button on the remote control to display sound track Mono on the screen. - 21 - Other Function External AV Input Function The unit has external AV input function. It supports COMPOSITE, S-VIDEO and COMPONENT modes. Use the audio, video, and S-Video cables to connect the unit to the external AV signal source such as recorder, video camera, satellite receiver or game player etc. Turn on the unit and the external AV signal source. [. . . ]