User manual POLAROID PDM-1040

[. . . ] 10" Portable DVD Player PDM-1040 1 Safety Instructions Read and keep operation manual book. When opening the contents of this package, carefully read the manual and follow all safety and operation instructions. Warning: This indicates that, "There is a risk of injury" or death. Caution: This mark indicates that, "There is a risk of injury or physical damage". Before Operation Warning Power supply: Power supply must correspond to the standard indicated on the cabinet. [. . . ] Gently wipe from the center of the disc to the outer edge. 24 Playback Operation READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING YOUR DVD PLAYER FOR THE FIRST TIME. WARNING: Only use high-quality dics, Poor-quality discs could damage the player's lens. Pre-operation 1. Connect the unit to power supply through the provided AC adaptor. Switch "POWER ON/OFF" to "ON" on the left panel to turn on the DVD player. The main unit power indicator light is green and screen displays the logo. Push OPEN button on the unit to open the disc tray cover, put a disc in the disc tray with printed side facing up. The player will search disc and play it automatically. Adjust the volume with the VOLUME control on the right panel to the desired level. To turn the player off, switch the "POWER ON/OFF" on the left panel to "OFF". Basic Operation Press MODE button to change the level of brightness, contrast and color. Please adjust these items with + and ­ buttons. Press the MODE button and hold it for1-2 seconds to change the aspect ratio between 16:9 and 4:3. See the below for details: MODE Button 25 Playback Operation Basic Operation (continued) For DVD disc, press ZOOM button to display the image as 2x-3x-4x-1/2-1/3-1/4-normal size in sequence. For JPEG disc, press ZOOM button first, then press button to enlarge the picture as follows: 125%-150%-200%-normal size ; press button to reduce the picture as follows:75%-50%-normal size. This function is not available for CD disc. ZOOM Button A-B Button In normal playback, press A-B button to select the segment that you want to play repeatedly. Press once to select the beginning point "A", press again to select the ending point "B" and play the segment repeatedly. Press A-B button again to cancel the repeat segment. This function is not available for JPEG disc. DVD Playback PLAY Load a disc in, the player will search the disc and play it automatically, press direction buttons to highlight the item that you want to play and press ENTER button to confirm. Press PAUSE button to pause during play, and press it again to resume normal play. During playback, press STOP button once to stop playing, then press PLAY button to resume normal playback from the place where STOP button is pressed. Press it twice repeatedly to stop playback completely. Press button to pause during play, and press it again to resume normal play. During playback, press button once to stop playing, then press button to resume normal playback from the place where button is pressed. [. . . ] There are no user serviceable parts inside. PROBLEM POSSIBLE CAUSE The disc cover may not be closed. There may not be any discs in the DVD drive. The disc may not be put in with the right way. The player's region code may not as the same as the region code of DVD disc. [. . . ]