User manual POLAROID POGO CZA-10011 TECHNICAL SPECIFICATIONS

[. . . ] But it is desirable that is should be installed and operated with at least 20cm and more between the radiator and person's body (excluding extremities: hands, wrists, feet, and ankles). This device complies with Part 15 of the FCC Rules and the RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. CAUTION RISK OF EXPLODING IF BATTERY IS REPLACED BY AN INCORRECT TYPE. [. . . ] DO NOT: · Send another image to be printed. DO: · · · · Open paper tray door. Check to see if there is paper in the tray. If so, ensure the paper is loaded correctly. If not, add a new pack of Polaroid ZINK Photo Paper. Photo exit slot Paper tray door The paper jammed before printing (nothing has been ejected) Power button Power/Battery LED indicator Status LED indicator USB connector Battery cover The paper jammed while printing (part of the image has already ejected) DO NOT: · Pull out paper. Open the paper tray door and remove media. Place one sheet of photo paper upside down (with the watermark facing up) in the paper tray. Gently glide the photo paper under the print head. The sheet of photo paper will automatically eject. Open the paper tray door and reload the photo paper. Close the paper tray door. LED Color Green Orange Red Orange Green Green Green Green Red Orange Action Solid Solid Solid Pulse (1X speed) Pulse (1X speed) Solid Pulse (1X speed) Pulse (3X speed) Pulse (1X speed) Solid Communication Power on Low battery Out of battery Charging from AC adapter Fully charged from AC adapter Ready to print Receiving information Printing Paper jam Out of paper, non feed If all else fails. . . DO: · Turn off the printer. If the printer will not power off, remove the battery cover and the battery. Turn on the printer. For additional troubleshooting and frequently asked questions, please visit www. polaroid. com/pogo or call 1-877-3779. Installing and Charging the Battery To install the battery: Printing: Camera Cell Phone Passcode: 6-0-0-0 3 For specific printing directions for your phone, visit www. polaroid. com/pogo. The following is an example for connecting to the printer and print your images. The terminology used in your cell phone may be different. 1 2 Remove battery door cover. Install battery. Replace battery door cover. To charge the battery: 1. Connect the AC adapter to the printer and the power source. Notes: · Before using the printer on battery power, fully charge the battery for 2. 5 hours. · You can print photos while plugged into the power source. Installing Polaroid ZINK Photo PaperTM To install the Paper: 1. Select the image you would like to print from the stored images on your camera cell phone. In the "options" menu, select "send via Bluetooth. " Search for devices and select the Polaroid printer and print. If you are unable to print from "send via Bluetooth, " select "connectivity" or "Bluetooth" under the "settings" or "tools" menu. Search for devices and select the Polaroid printer. [. . . ] · To print the date on your photo, ensure the Date Stamp feature on your digital camera is enabled. · Does not print when connected to a PC. 3 Slide the 10-pack of Polaroid ZINK Photo Paper into the printer. Make sure the ZINK Smart SheetTM is placed facedown. The ZINK Smart Sheet will automatically eject. 4 Press and hold the POWER button to turn on the printer. Notes: · Works only with Polaroid PoGoTM and other Polaroid ZINK products. [. . . ]