User manual POLAROID POLACOLOR PRO 100 FILM DATA SHEET

[. . . ] Film Data Sheet Polacolor Pro 100 4 x 5 Sheet Film Description Professional Color Sheet Film 4 x 5 inch 9 x 12 cm. Polacolor Pro 100 film Medium-speed, medium-contrast, medium-grain, daylight and electronic flash balanced (5500°K) color print film. This film features accurate colors and bright whites; sharp, vibrant, saturated proofs and final art; lower contrast for greater detail; improved reciprocity characteristics, and fast clearing and drying. Key Applications · Professional photography (proofing and final art) · Passport/document photography · Scientific/industrial photography Compatible Hardware Film Speed ISO 100/DIN 21 · Any instrument or camera equipped with a Model 545/545i Film Holder · MP-4+ Camera Special Instructions Temperature affects the final image: Processing at temperatures above 95°F (35°C) or below 55°F (13°C) is NOT recommended. [. . . ] (9 x 11. 4 cm) Finish Glossy or silk Exposures per Unit 20 exposures per pack Development Time 90 seconds at 70°­95°F (21°­35°C) Caution This film uses a small amount of caustic paste. If any paste appears, avoid contact with skin, eyes and mouth and keep away from children and animals. If you get some paste on your skin, wipe it off immediately, then wash with water to avoid an alkali burn. If eye contact occurs, quickly wash the area with plenty of water and see a doctor. Keep discarded materials away from children, animals, clothing and furniture. Alternative Product Use Polacolor T-59 for emulsion lift and T-64 Tungsten for tungsten lighting. Processing Information Temperature °F °C 70-95 65-69 61-64 55-60 21-35 18-20 16-17 13-15 Proc. Time (sec. ) Equivalent Film Speed (ISO/DIN) Exposure Adjustment None None None None Limited Warranty See information on the film box. 90 120 150 180 100/21 100/21 100/21 100/21 "Polaroid" and "Polacolor" are trademarks of Polaroid Corporation, Waltham, MA 02451 USA. Film Data Sheet Technical Data Polacolor Pro 100, T-79 Instant Color Film This information represents the typical performance of Polaroid Pro 100 color films. Specific film lots may vary. Characteristic H&D curve for normal development Recommended speed (ISO) Recommended processing time and temperature Resolution (1000:1) Contrast 100 / 21o 3 Blue H&D Curves @ 71oF/21oC 90 sec. at 70oF/21oC 8 line pairs/mm medium Green Red 2 Sample Density 1 0 -3 -2 -1 Relative Log Exposure 0 Characteristic H&D curve for hot development H&D Curves @ 95o F/35o C 3 Blue Green Red Blue Green Red Processing time and temperature o o F C Time in seconds 90 90 90 120 150 180 95 75 70 65 60 55 32 24 21 18 15 13 Characteristic H&D curve for cold development H&D Curves @ 55oF/18 oC 3 D-Max: The density value for the film's darkest black. D-Min: The lowest density value that a film exhibits. In prints, the whiteness of the brightest highlight, relative to the unprocessed print. [. . . ] Reciprocity failure occurs during very long or very short exposures, requiring the photographer to increase exposure. Spectral Sensitivity: Shows the equivalent energy needed at each wavelength in order to activate the emulsion so that it produces a neutral density of . 75. Spectral Sensitivity 100 10 1 0 350 400 450 500 550 600 650 700 Wavelength (nm) [. . . ]