User manual POLAROID T1032

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Pressing the button during image playback will result in a 90-degree clockwise rotation display. Slide the zoom lever to side enlarges the image. To return to normal magnification, slide the zoom lever to side. An [ ] icon is displayed with the video data. An [ ] icon is displayed with images which have an audio memo recorded. EN-22 Thumbnail Display This function allows you to view thumbnail images on the LCD display so you may search for a particular image/video clip/audio file. 3 thumbnail images are displayed simultaneously. Press the / buttons to select the file to be displayed. Press the / buttons to go to the previous or the next page. Press the button to exit from the thumbnail display. 100-0001 100-0001 100-0002 100-0002 100-0003 100-0003 100-0004 100-0004 100-0005 100-0005 100-0006 100-0006 100-0007 100-0007 Removing Red-eye You can use this function to remove the red-eye phenomenon after an image is taken. Select the image that you want to edit with the / buttons. Select [Fix Red Eyes] with the / buttons, and press the button. Select [Execute] with the / buttons, and press the button. View the changes on the corrected image. To save your corrected image, select [Confirm] with the / buttons, and press the button. When this process ends, this replaces the original image with the corrected image. 0 EN-23 Dynamic Lighting Feature This feature compensates for the unfavorable lighting conditions by brightening underexposed areas and balancing overexposed areas. Select the image that you want to edit with the / buttons. Light. ] with the / buttons, and press the button. Select [Execute] with the / buttons, and 0 press the button. View the changes on the corrected image. To save your corrected image, select [Confirm] with the / buttons, and press the button. When this process ends, this replaces the original image with the corrected image. Attaching Voice Memos A maximum of 30 seconds of audio can be recorded as a memo for captured still images. The voice memo can be recorded only once. Select the image to which you want to attach the voice memo with the / buttons. [. . . ] Select the item you want to configure with the / buttons, and press the button. [Images]:Select whether you want to print specific image or all images. You may also select printing number for specific image. [Date Print]:According to the printer type, select whether you want to print the image with date imprint or not. [. . . ]