User manual POLAROID TLS-01911B

[. . . ] 15" / 19"/ 22" HD-Ready Widescreen LCD TV Your TV may look different from the one pictured above. Questions?Need some help? This manual should help you understand your new product. If you have questions, call our toll-free number found on the insert with this icon: Or visit www. polaroid. com. Warnings and Precautions Warnings and Precautions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. [. . . ] You can view DVD films in native wide format for an enhanced multimedia experience and enjoy gaming action at full frame rates and higher widescreen resolution. 6 Chapter 1 Introducing the LCD TV Package Contents Make sure all of the following components are included. LCD TV ENGLISH Remote Control/ AAA Batteries x 2 Video Cable INPUT Power Cord Audio Cable The power cord type may be different depending on your country's power type. These items are all you need to set up and operate the LCD TV in its basic configuration. Make sure all of the above components are included. If you are missing any items, please return this product to the original place of purchase. 7 Chapter 1 Introducing the LCD TV Setting Up Your LCD TV How to Install the TV Stand Follow the instructions below to install the TV stand: Open the box and make sure both the LCD TV and the stand are in the box. LCD TV Stand Cover an even stable surface with a soft cloth. Place the LCD TV unit facedown on the cloth. Fit the stand onto the bottom of the LCD TV unit as shown: Push until the stand clicks into the LCD TV's stand socket. 8 Chapter 1 Introducing the LCD TV How to Setup the TV Follow the instructions below to set up and install the LCD TV: ENGLISH Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV's ANT. Connect the AC power cord to the back of the TV and then to the wall outlet. Insert the 2 supplied batteries in remote control. Step1 Slide the back cover up to open the battery compartment of the remote control. Step2 Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment. Slide the cover back into place. Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner etc. ) on the remote, as it may suffer damage. Connect an external A/V device (refer to page16-23). 9 Chapter 1 Introducing the LCD TV Your LCD TV Front Side View and Controls Right Side View Front View Left Side View IR Infrared Receiver LED The LED light indicates when the LCD TV is activated. VOLUME + Adjusts the volume up and down. Selects the main-menu item and change values for items when in the OSD mode. HEADPHONE Connects to the external headphone for private listening. CHANNEL Scans up and down through channels. Selects sub-menu item when in the OSD mode. MENU Press once to display the OSD (on screen display), press again to turn the OSD off. INPUT Chooses from different input signal sources. Turns the LCD TV on and into standby mode. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connection that is provided with the various antenna systems. A 75-ohm system is generally a round cable (not included) with Ftype connector that can easily be attached to a terminal without tools. F-type connector 75-ohm coaxial cable (round) A 300-ohm system is a flat twin-lead cable (not included) that can be attached to a 75-ohm terminal through a 300-75-ohm adapter (not included). 300-ohm twin-lead cable (flat) 13 Chapter 2 Installing the LCD TV Use one of the following two diagrams when connecting an outdoor antenna. A. Combination VHF/UHF antenna VHF/UHF Antenna 300/75-ohm adapter (not included) VHF/UHF Antenna 300-ohm twinlead cable 75-ohm coaxial cable B. Separate VHF and/or UHF antennas UHF Antenna Combiner (not included) 300-ohm twinlead cable OUT IN VHF Antenna 75-ohm coaxial cable 300-ohm twinlead cable 14 Chapter 2 Installing the LCD TV Cable TV (CATV) Connection A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable to the set, connect the 75ohm cable into the ANT. Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of scrambled channels. For more specific instructions on installing cable TV, consult your cable TV company. One possible method of connecting the coverter/descrambler provided by your cable TV company is shown in the diagram below. RF switch (not included) OUT A IN B ENGLISH 2 set signal splitter (not included) Cable TV Line VHF/UHF IN Cable TV converter/ descrambler (not included) The RF switch (not included) is required to provide two inputs (A and B). [. . . ] Controls the translucence of the OSD on-screen menus's background. Allows selection of the time that elapses before the TV shuts off automatically. Restores factory settings. 31 Chapter 3 Using the LCD TV Customizing the TV Settings Press the button to turn the LCD TV on. Press the MENU button on the remote control to display the Main menu, and use the buttons to select the TV Setup. Use the buttons to highlight an individual TV Setup option, use the buttons to change the settings, and press the MENU exits the menu. C TV Setup Auto Scan Fine Tune Add / Erase Channel Name Channel Swap Manual Search Channel Reset 1 0 Add 1 Move Select Exit The TV Setup menu includes the following options: Auto Scan Press the OK button and select "Yes", The Auto Scan automatically creates a list of receivable channels from VHF/UHF antenna or Cable TV if the source is connected. [. . . ]