User manual POLAROID TLU-02643B EN

[. . . ] 1 Features of your new television. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Your new television has . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press OK on your remote control and select "S" for cable channels and "C" for channels received via the antenna. Move onto the PROGRAM NO tab and enter the channel number in which you would like to have the channel stored. If the broadcast viewed on SETUP SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM BG S06 0 P13 in descending order with Left movement button. If the channel that is found is of your liking, select the STORE tab. Then store it in the memory pressing the right or left movement buttons. Repeat the same procedure for other channels by selecting the program number of your SETUP SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM BG S06 0 P13 SELECT MENU BACK SELECT MENU BACK the screen is of your desired quality, first move onto the STORE tab with the down movement button to store in the memory the selection you have made and store the channel by pressing the right or left movement buttons. The prompt STORED will be displayed briefly. The channel will be stored according to the program number of your choice. You can tune and store in memory other channels the same way. In the event that you wish to exit the channel settings menu for any reason, simply press the EXIT button. choice from the PROGRAM NO tab. If the channel you found is not of the desired quality and requires Fine Tuning or if you would like to rename the channel, refer to the relevant sections. 6. 4-Fine Tuning If the channel you found is not of the desired quality and requires Fine Tuning, then select the FINE TUNE tab by pressing the downward movement button intheSetupmenu. Usingthe right-left movement buttons on your remote control, adjust the broadcast displayed on the screen toyourdesiredquality. Undernormal circumstances, you will not require to use the Fine Tune function. After setting is complete, press the EXIT button to exit the menu. 6. 5. 4-To name the channels You can assign your program or programs of choice the names that have a maximum of five characters. Select the program you would like to name from the Program Table by pressing the up/down or right/left movement buttons. "Press the "YELLOW" button. An empty space appears beside the channel for which you would like to specify name information. Here, choose the desired letter, number or sign using the up/down movement buttons. For the second character, presstheright/leftmovement button and then select the desired letter, number or sign again with the up/down movement buttons. After entering all the characters, store the name you have written in the memory by pressing the "YELLOW" button. To write names for any of the other programs, simply repeat the above procedure. If you want to exit the menu, simply press the EXIT button. If the program is not named, then the channel number of that program will be displayed automatically. 6. 5. 2-Deleting a stored channel: Select the program you would like to delete by pressing the up/down or right/left movement buttons. "Press the "BLUE" colored button. [. . . ] Here, you can select the desired input. The headphones must have an impedance between 8 and 32 ohms and have a 3. 5 mm stereo jack plug. Plug the headphone jack into the headphone socket of the TV. TV: While in the AV modes, move onto this option and press OK button for switching to the TV mode. SCART 1: To watch the picture of the High Definition - HD ready broadcast device connected to Scart1, move onto this option and press the OK button. (YoucanwatchviathisScartifthe connecteddevicehasaRGBoutput). SCART2 (Optional): To watch the picture of the broadcast device connected to Scart2, move onto this option and press the OK button. SVIDEO: To watch the picture of the Your television can receive high-definitionsignals(HDTV). You can connect the input sources(HDTVset-topboxor HDTVDVDplayer)tothe(HDMI)socket (digitalHDTVsignal). Thisensuresthat you can view digital HDTV programs, even iftheyarecopy-protected(HDCPHighDefinitionCopyProtection). broadcast device connected using the S-Video input, move onto this option and press the OK button. AV (Optional): To watch the picture of the broadcast device connected using the RCA(Cinch)input, moveontothisoption and press the OK button. mode, move onto this option and press the OK button. HDMI (Optional): To be able to watch PC: To be able to watch the images in PC the image when a connection is made via the HDMI socket, this option must be selected. YPBPBR (Component Input) (Optional): To be able to watch the image when a connection is made via this socket, this option must be selected. 19 I k 9. 1-Connection types for external devices SCARTSOCKET VCR/VCD Your TV is equipped with 8 inputs including antenna input, which allows for the external device connection. [. . . ]