User manual POLAROID TLU-03743B

[. . . ] 26"/ 32"/ 37"/ 42" Digital HD-Ready LCD TV Your TV may look different from the one pictured above. Questions?Need some help? This manual should help you understand your new product. If you still have questions, call our help line found on the insert with this icon: Or visit www. polaroid. com/support. Cleaning Your LCD TV There are no parts which can be serviced or cleaned inside the TV's cabinet. You can increase the life of your LCD display by taking the following precautions: · Before cleaning, always disconnect the power line and all connection cables. · Do not use any solvents, caustic or gaseous cleaning agents. · Clean the display with a soft, lint-free cloth. [. . . ] B: Shows how to use a separate VHF and/or UHF outdoor antenna. ENGLISH A. Combination VHF/UHF antenna VHF/UHF Antenna 300/75-ohm adapter (not included) 300-ohm twinlead cable VHF/UHF Antenna 75-ohm coaxial cable B. Separate VHF and/or UHF antennas UHF Antenna Combiner 300-ohm twin(not included) lead cable OUT IN 75-ohm coaxial cable 300-ohm twinlead cable VHF Antenna 15 Connecting Your LCD TV Cable TV (CATV) Connection A 75-ohm coaxial cable connector is built into the set for easy Hookup. When connecting the 75-ohm coaxial cable to the set, connect the 75ohm cable into the ANT. Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown, consult your cable TV company. ) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of connecting the converter/descrambler provided by your cable TV company is shown in the diagram below. RF switch (not included) OUT A IN B 2 set signal splitter (not included) Cable TV Line VHF/UHF IN Cable TV converter/ descrambler (not included) The RF switch (not included) is required to provide two inputs (A and B). Setting the RF switch to position A allows viewing of all unscrambled channels by using the TV channel keys. Setting the RF switch to position B allows viewing of all scrambled channels via the converter/descrambler by using the converter channel keys. 16 Connecting Your LCD TV Use a supplied antenna cable to connect the TV signal to the LCD TV's TV CABLE terminal. ENGLISH Connect the AC power cord at the back of the TV and connect the power cord to wall outlet. Press the button on the remote to turn on the LCD TV. Always disconnect the LCD TV from the power outlet when the LCD TV will not be used for a long period of time. The button on the front panel is only used for switching the LCD TV into standby, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket. Press the INPUT button on the remote to display the Source List. Use the buttons to select TV, and press the OK button. Input Source TV VIDEO1 (SIDE) VIDEO2 (REAR) VIDEO3 (SCART1) VIDEO4 (SCART2) VIDEO5 (YPbPr) VIDEO6 (HDMI1) VIDEO7 (HDMI2) COMPUTER(VGA) 17 Connecting Your LCD TV Press the MENU button on the remote control to display the Main menu, and use the buttons to select the TV. Country CI Channel Scan Update Scan Channel Skip Channel Sort Channel Edit Favourite List Channel Decode Analogue Ch. Fine Tune United Kingdom TV OK Enter Select Exit Press the button to select Country and select your country by the buttons. Press the button to select Channel Scan, and press the OK button. The Channel Scan automatically creates a list of receivable channels in digital and analogue mode. Channel 901 and above are for analogue channels. Press the MENU button at any time to interrupt the memorization process. (the list cannot be created if interrupted) Status: Scanning. . . . . Digital Channels: 0 Analog Channels: 25 Cable 47% Press the number buttons or CH to select a TV channel. 18 Connecting Your LCD TV How to use CI (Common Interface) card ENGLISH CAM Connects CI (Common Interface) card To view the premium digital content in digital TV mode (available in limited areas). TO INSERT A CI CARD Insert the CI card into the slot in the direction of the arrow until it fits. TO REMOVE A CI CARD When removing the CI card, do not attempt to pull it from its slot. Please push the EJECT button as illustrated below. This function enables you to watch the Premium digital content in some channels. [. . . ] Press the buttons to highlight the channel, and press the OK . Press the buttons to select the position in which you would like to change, and press the OK button. Channel Edit Allows to assign a name of the channel. Press the buttons to highlight the Channel Number, and press the 0-9 keys and (INPUT) button to enter the channel numbers. [. . . ]