User manual POLAROID TLU-42243B

[. . . ] 22" 16:9 HD-READY DIGITAL LCD Your TV may look different from the one pictured above. Questions?Need some help? This manual should help you understand your new product. If you still have questions, call our help line found on the insert with this icon: Or visit www. polaroid. com/support. TABLE OF CONTENTS Contents 1 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 1 Cleaning the screen and cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 2 Disposing of your TV at the end of service life. . . [. . . ] Most of the broadcasting enterprises provide daily program information, but they do not give detailed explanations. Some broadcasting enterprises, on the other hand, do not give any program information at all. 6. 3. 6-Digital Features To enter digital features menu, select FEATURES tab from the main menu by using Up/Down movement buttons. Select DIGITAL FEATURES tab from FEATURES menu by using Up/Down movement buttons and press OK button to confirm. DIGITAL FEATURES menu will be displayed. 6. 3. 5-Electronic TV Guide (EPG) If it is supported by the broadcasting enterprise, the electronic TV guide gives entire general information about the programs of the next 8 days (for digital channels only). 12 I EN Digital Features Language Settings Access Control User Interface Options Timers Favourite List No Common Interface Module Present System Menu Access Control Lock/Unlock Channels Change PIN Select Back Select Back You can select the menu headings with Up/ Down movement buttons to make settings. 6. 3. 6. 1-Language Settings You can select subtitle and sound language provided that the broadcast is supported for all digital broadcasting channels. Unless you make any selection, the language supported by the broadcaster will be selected automatically. To perform language selection, select Subtitling Language 1, Subtitling Language 2, Audio Language 1, Audio Language 2 tab from the Language Settings menu by using Up/Down movement buttons and make your language selection with Left/Right movement buttons. You can also select subtitles directly by SUBT button on your remote control or make sound selection by AUDIO button. Note 1: To re-prevent access after entering the correct password and displaying the precluded channel, your television has to be switched to Standby mode and turned on again. Note 2: The password for both of these features has been set as 0000 at the factory. You can change the password as you wish under Change PIN item in the Access Control menu. 6. 3. 6. 3-User Interface Options From this menu, you can decide whether to display the scrambled channels in the program table or not. If List Scrambled Channels is set to ON, all channels will be displayed, if it is set to OFF, scrambled channels will not be displayed and if it is set to AUTO and a CI card is installed to your television, then the scrambled channels supported by the card will be displayed. 6. 3. 6. 2-Access Control With this feature you can preclude channels that are not appropriate for children and set age restriction for programs being broadcasted. Lock/Unlock Channels: Select Lock/ Unlock Channels tabs from Access Control menu and press OK button to confirm. All TV Channels list will be displayed; select the channel you want to preclude with Up/Down movement buttons and press OK button to confirm. x mark will be displayed at the beginning of the channel name and thus channel is precluded. To remove such preclusion, repeat the same steps. Select the channel to access the precluded channel and enter the correct password into the displayed password screen. The channel will not be displayed unless the correct password is entered. 6. 3. 6. 4-Timers In this menu you can view Reminders you had entered from the EPG or change or delete the entered Reminders. 6. 3. 6. 5-Favourite Lists Please see 6. 3. 4. 2-Creating favorite channel list, for detailed explanation of this feature. 6. 3. 6. 6-Common Interface Module In this menu, you can make the CI Module settings that you can attach to your television. 6. 3. 6. 7-System Menu You can display your television's hardware and software data under this menu. 13 I EN 6. 4-Performing Analog Tunings You can either tune the Analog channels automatically or manually and store them in your television. COUNTRY SELECTION BELGIUM CZECH REP. DANMARK DEUTSCHLAND ELLADA ESPANA FRANCE HUNGARY IRELAND ITALIA NETHERLANDS NORGE ÖSTERREICH POLSKA PORTUGAL SCHWEIZ SUOMI SVERIGE TÜRKYE U. K. START 6. 4. 1-Automatic tuning of channels and storing in the memory Note: If your television does not receive any antenna broadcast for a period of 5 minutes, it automatically switches to the stand-by position. The countdown OSD is displayed on the screen during the last 1 minute (applicable for Analog mode only) You can tune the programs automatically with the Autoprogram function of your television and then sort the channels as you desire by means of the Program Table. Press AV button on your remote control, select ANALOG tab from the SOURCE menu by using Up/Down movement buttons and confirm by pressing the OK button. Press the MENU button on your remote control. Select SETUP tab with Down movement button and confirm with OK button. [. . . ] For this operation, just select the Autoconfiguration tab and press OK button. 9. 5. 5-HORIZONTAL POSITION: Horizontal position setting. 9. 5. 6-VERTICAL POSITION: Vertical position setting. 9. 5. 7-CLOCK FREQUENCY: This is the pixel clock frequency. User can narrow down or enlarge the display by selecting a desired value. 9. 5. 8-PHASE: Using the right/left movement buttons, you can ensure that the colors and shapes are exactly consolidated on the PC image. 9. 5. 9-PICTURE FORMAT You can select the PC image to be displayed in 16:9 or 4:3 formats. 24 I EN 10 Help and tips Failure The television does not function Possible cause Is the power cord connected to the mains supply? [. . . ]