User manual POLAROID TLU-42643B

[. . . ] 26"/32"/37" 16:9 HD-READY DIGITAL LCD Your TV may look different from the one pictured above. Questions?Need some help? This manual should help you understand your new product. If you still have questions, call our help line found on the insert with this icon: Or visit www. polaroid. com/support. TABLE OF CONTENTS Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 1-Cleaning the screen and cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1. 2-Disposing of your TV at the end of service life. . . 1 1. 3-Superior features of your integrated digital television . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The countdown OSD is displayed on the screen during the last 1 minute (applicable for Analog mode only) You can tune the programs automatically with the Autoprogram function of your television and then sort the channels as you desire by means of the Program Table. Press AV button on your remote control, select TV tab from the SOURCE menu by using Up/Down movement buttons and confirm by pressing the OK button. Press the MENU button on your remote control. Select SETUP by pressing the down movement button and confirm your selection with OK button. Setup menu is displayed. SETUP SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM SELECT BG S06 0 P13 START AUTOPROGRAMMING the country, whose broadcast you would like to watch in priority, by pressing the right/left movement buttons and start autoprogramming by pressing the OK button. The channels will be automatically searched and those found will be stored in memory starting from the program selected in the SETUP menu. At the same moment, the Autoprogram menu will be displayed and a marker indicating the progress of the autoprogramming will appear as shown below. AUTOPROGRAM SEARCHING % 20 MENU STOP To stop the process at any given time, please press the MENU button. The Program Table, which will allow you to sort the channels as you wish, will be displayed after the automatic search is complete. MENU BACK 14 I GB 6. 4. 2-Manual tuning of channels and storing in the memory 6. 4. 2. 1-Ifyoualreadyknowthe channel number SETUP SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM CHANGE BG S06 0 P13 6. 4. 2. 2-Ifyoudonotknowthe channel number Press the MENU button. Move to the SETUP menu by pressing the down movement button in Main Menu and confirm your selection with OK button. Select the system in which you would like to make the search from the System tab. Move into CHANNEL tab by pressing the Down movement button. Press OK on your remote control to select "S" for cable channels and "C" for channels received via the antenna. Select SEARCH tab using the up/down movement buttons, and scan the channels in ascending order with Right movement button and in descending order with Left movement button. If the channel that is found is of your liking, select the STORE tab. Then store it in the memory by pressing the Right or Left movement buttons. Repeat the same procedure for other channels by selecting the program number of your choice from the PROGRAM NO tab. If the channel you found is not of the desired quality and requires Fine Tuning or if you would like to rename the channel, refer to the relevant sections. 6. 4. 3-Fine Tuning If the channel you found is not of the desired quality and requires Fine Tuning, then select the FINE TUNE tab by pressing the Down movement button intheSetupmenu. Usingthe Left/Right movement buttons on your remote control, adjust the broadcast displayed on the screen toyourdesiredquality. Undernormal circumstances, you will not require to use the Fine Tune function. The AFC values of your television will automatically adjust and lock themselves to the channel. However, you might need it in case the television transmitters do not operate according to the standards. To store in the memory, the settings you have made, select the Store tab and press the Right or Left movement button. MENU BACK Press the MENU button. Move to the SETUP menu by pressing the down movement button in Main Menu and confirm your selection with OK button. [. . . ] Note 2: Scart1 To connect a RGBsupported external device to your television, you must use a Scart cable supporting RGB. In this case, if your external device supports, you can set the output as RGB. 9. 2. 6-CLOCK Thisisthepixelclockfrequency. Usercan narrow down or enlarge the display by selecting a desired value. 9. 2. 7-PHASE Usingtheright/left movement buttons, you can ensure that the colors and shapes are exactly consolidated on the PC image. 9. 2. 8-AUTOCONFIGURATION The most suitable geometric settings in accordance with the entry mode are configured by this function. For this operation, select the AUTOCONFIGURATION tab and press OK button. [. . . ]