User manual POLK AUDIO RC6S

[. . . ] The mounting surface must be at least 3/8" thick, and best performance will be achieved when the in-wall air volume is greater than . ) Placement for custom in-wall and in-ceiling speakers demands careful consideration, since installation requires that you cut a hole in your wall or ceiling!A NOTE ABOUT SPEAKER SHIELDING This speaker is NOT magnetically shielded and should not be placed within 6" of a television set or video monitor. If you see any color distortion on your TV or monitor, move the speaker away from the TV or monitor. [. . . ] If you intend to do the installation yourself we recommend that you possess some skill in the proper use of hand and power tools. You should have a thorough understanding of local building and fire codes and a familiarity with the area behind the wall or ceiling into which you plan to install your speakers. Proper installation of in-wall or in-ceiling speakers requires that you run your speaker wires before the install begins. Wire meeting appropriate building and fire codes must be used (and this is your responsibility, of course). wiring is best performed by an experienced professional. If you are in doubt that you possess the necessary skills or tools, consult your Polk Audio dealer, or a professional installer. Keyhole saw, ultility knife or material-appropriate tool for cutting drywall or other wall material. â· Screwdriver, preferably powered, with Phillips head bit. â· Power drill with appropriate bit (optional, for starting wall cut). 6 Get more information and exclusive accessories, visit www. Make sure the material into which you plan to mount the speakers (plaster, drywall, paneling, stone, etc. ) can support the weight of the speakers (see specification page for the weight of your model). Make sure the locations you select do not conceal studs, electrical wiring or plumbing. Prior to installation, hold the speaker in your chosen location to make sure it safely clears obstacles such as studs, corners, beams, lighting fixtures and door/ window frames. Your cutout must be at least 1" from adjoining walls or ceiling, internal studs or plumbing. Using the template, trace the installation location with a pencil. You can do this by holding the template in your preferred location and tracing within it or around it. This is the exact cutout size [Figure 6]. Carefully cut the hole with the appropriate cutting tool for your wall or ceiling material. start the hole by drilling a hole on the inside of the tracing (with the drill bit touching the line). Use this hole to insert the saw or knife and begin cutting [Figure 7]. Once you have cut the hole, fish your previously positioned wiring out of the hole and connect the speaker. [. . . ] , warrants, to the original retail purchaser only, that any AMPLIFIER OR OTHER ELECTRONIC COMPONENT that may be included in this Polk Audio Loudspeaker Product will be free from defects in material and workmanship for a period of three (3) years from the date of original retail purchase from a Polk Audio Authorized Dealer. To allow Polk Audio to offer the best possible warranty service, please register your new product online at: www. Com/registration or call Polk customer service 800-377-7655 in the USA and Canada (outside the USA: 410-358-3600) within ten (10) days of the date of original purchase. Be sure to keep your original purchase receipt. [. . . ]