User manual POLTI VAPORETTO 3 CLEAN

[. . . ] The optional accessories are on sale at all the best domestic appliance retailers, an Authorised Polti Service Centre or online at www. Uk and in good appliance shops you will find a wide range of accessories to increase the performance and the practical Applications of your appliances to make home cleaning even easier. To check the compatibility of an accessory with your appliance, Uk or call our Customer Services department to register your product. You can benefit from a special welcome offer, in participating countries, and keep up to date on all the latest Polti news, as Well as buy accessories and consumables. [. . . ] Release the brush from its position, place a foot on the brush and tilt the handle (6). During cleaning, it is possible to insert the power cable into the upper hook to avoid it getting in the way (7). 1 Remove the water tank from the appliance, pressing the side buttons and pulling outwards (8). Open the cap of the tank by pulling it outwards (9), then fill the tank with water. Do not add other substances or additives to the tank. 2 Close the cap of the tank and reattach it to the appliance. Always use the product with the cord completely unwound. Do not mount the nozzle without having first attached the cap. Before using the appliance on delicate surfaces, ensure that the area in contact with the surface is free from foreign bodies that could cause scratches. Polti Vaporetto 3 Clean / 3 Clean_Blue is a combined product that can be used as a vacuum cleaner, a steam upright, to wash and sanitise floors or in combined steam upright mode with a suction action to save on cleaning time. SUCTION ONLY Ensure that Section 1 has been followed and proceed as described in Section 2. STEAM ONLY Ensure that Sections 1-3 have been followed. 1 Adjust the steam intensity based on the type of floor (13); for hard floors (tiles, ceramic surfaces, etc. 2 Release the appliance from its position, place a foot on the brush and tilt the handle (6), then press the steam button (23) on the handle, and begin cleaning moving the brush back and forth. To stop the steam flow, release the steam button. 3 The brush has a flexible joint that makes it easy to clean corners and edges of furniture and walls. COMBINED MODE: STEAM / SUCTION The combined use of steam and suction allows the dust to be removed and the floor to be sanitised in a single stroke. proceed as described in Sections 1-2-3. During cleaning, it is possible to insert the power cable into the upper hook, to avoid it getting in the way (7). During cleaning operations, the use of the Cloth allows the floors to be washed and sanitised so that the dirt loosened by the steam is collected by the cloth. Before removing the cleaning nozzle with the cloth from the brush, wait a few minutes to allow the cloth to cool. Then place a foot on one of the two lateral pins of the nozzle and pull the steam upright upwards. [. . . ] During suction, dust comes Dust collector not insert- Insert the dust collector tank Out of the appliance. The dust collector tank does Filter wrongly inserted. If problems persist or are not listed above, please contact a Polti Authorised Service Centre (www. This appliance is for domestic use only and is guaranteed for two years from the date of purchase against any defects present at the time the goods are handed over; the date of purchase must be proven via a proof of purchase document valid for tax purposes and issued by the seller. [. . . ]