User manual POLYCOM IPOWER 960 INSTALLATION INSTRUCTION

[. . . ] iPower System Software Release Bulletin and Installation Instructions Version 6. 2. 0 Last Updated: 12/16/2004 To ensure that you have the latest version of this document, go to http://www. polycom. com Copyright © 2004: Polycom, Inc. Polycom, Inc. , 4750 Willow Road, Pleasanton, CA 94588 www. polycom. com Polycom and the Polycom logo are registered trademarks of Polycom, Inc. Concorde, Global Management System, ImageShare, iPower, LiveManager, Montage, NetConference, PathNavigator, People+Content, PVX, SureConnect, PowerMic, ProMotion, Siren, System 4000, Venue, ViaVideo, ViewStation, Visual Concert and VSX are trademarks of Polycom, Inc. All other product names are the trademarks of their respective owners. [. . . ] If this happens, click OK in the error message window, and select a new folder location from the screen that follows. Calling When the iPower system is showing Content in a non-Dual Images call, the iPower system cannot adjust its People camera. The iPower system can only control a camera that is displaying video. In this software version, you cannot make 2x64 non-dialed (DCEsignaled or DCE-dedicated) calls. To address this issue, place 1x128 calls instead. In a multipoint call that includes the ViewStation FX, the iPower system cannot control the presenter's camera During a call, you may experience substantial delays in T. 120 activities when the far end takes control. To make a loopback call, select a rate less than or equal to the number of ISDN lines connected. When you are in a loopback call, the system does not allow you to select the Content source. Conference Statistics and Operating Statistics may report a video error when you add or remove Content from a videoconference. This does not affect the quality of the call. The iPower system does not transmit video in an H. 263 ISDN QCIF call to a PictureTel Concorde·4500. To address this issue, set the resolution on the Concorde to CIF. If an iPower system receives a still-image graphic from another type of system, the iPower system displays the graphic until the end of the call. If an iPower system receives a still-image graphic from another type of system and you switch the image from the main video window to the PIP, the PIP displays a black screen. Use a voice alias or E. 164 address when placing Voice over IP (VoIP) calls. Otherwise, the system may treat an incoming or outgoing call as a video call (for example, it may automatically answer the call if you configured auto-answer for video calls). If a call is sent through a gateway or MCU that does not support People and Content, the Content video quality is reduced, even if both endpoints support People and Content. Configure a gatekeeper before attempting to make gateway calls. In a PathNavigator Conference on Demand call, only the local system is included in the Conference Sites list. To include all sites, enable Chair Control on the MCU. Conferences hosted by an Avaya MCU do not support the Browse function. If you select Remote Control > Far-End Camera and turn off Picture-in-Picture (PIP) from the iPower collaboration application Options menu, you are unable to switch to near-end camera control. H. 323 MCU, the call does not connect when dialed with an E. 164 address that starts with the digit "1". When you use the on-screen Camera Controls, you cannot use the onscreen cursor for functions outside of the Camera Controls, such as muting. You can use the buttons on the remote control or a keyboard shortcut. [. . . ] If your system is set up for Auto Logon, use AdminTools to configure the system to use Standard Windows Logon, and restart the system. See the iPower Collaboration System Tips and Troubleshooting Guide for details. Download the software from the Polycom Web site (extranet. polycom. com) to your local drive. Ensure that you have at least 195 MB of free space on the C: drive. [. . . ]