User manual POLYCOM ONLAN

[. . . ] OnLANTM System Software Upload Utility User Guide © 1998 RADVision Ltd. Pub 61280-00006 Rev C Notice No part of this publication may be reproduced in any form whatsoever without prior written approval by RADVision. No representation of warranties for fitness for any purpose other than what is specifically mentioned in this guide is made either by RADVision or its agents. [. . . ] 3. Run Windows Explorer and double-click Setup. exe located on the installation diskette. Follow the instructions in the setup windows to install the application. The installation procedure copies the program files to the path you specified during setup (the default path is \RVCFG\RVBURN) and creates a Start menu item, Software Upload Utility. Note: You only need to install the Software Upload Utility once for all OnLAN 323 and OnLAN 1 Units. Running the Software Upload Utility To run the OnLAN Software Upload Utility do one of the following: § Click the Start button, and then point to Programs. Point to the RADVision OnLAN Tools folder, and then click Software Upload Utility. Run Windows Explorer, point to the OnLAN file you want to upload and double-click it. Create a shortcut to the OnLAN Software Upload Utility. Add the OnLAN unit's IP address to the shortcut's command line. Double-click the Software Upload Utility icon. § § The Software Upload Utility window appears. 4 OnLANTM System Software Upload Utility Running the Software Upload Utility Introduction Figure 1 Software Upload Utility window for OnLAN L2W-323 Software Upload Utility Window Parameters IP The IP address of the OnLAN Unit to which you upload the file. If you added the IP to the desktop icon's command line and ran the utility from the icon, the unit's IP is automatically displayed in this field. Path Displays the path of the OnLAN file you wish to upload. Look in Drop-down list box that lets you browse your drives and directories. If the file you wish to upload is not displayed, use the arrow next to the OnLANTM System Software Upload Utility 5 Introduction Running the Software Upload Utility Look in drop-down list box or the Up one level button to browse to the desired file. Main Window Displays file details of the selected OnLAN or Flash file. File Name Displays the name of the selected OnLAN or Flash file. Following are the OnLAN file extensions: . bg1 . bg3 . bv1 . bv3 . bwb . fls Files of type OnLAN 1 Gateway Software OnLAN 323 Gateway Software OnLAN 1 VIU Software OnLAN 323 VIU Software OnLAN ISDN Driver Other RADVision software modules Displays the types of files that can be uploaded: OnLAN files and Flash files. Upload Starts the uploading process. Exit Quits the program. Uploading Files to the OnLAN Unit 1. In the IP field type the IP address of the unit to which you wish to upload the software /message file. [. . . ] You may need to reconfigure certain parameters of your OnLAN Unit after the upload process is completed. Refer to the Configuration section in the appropriate unit's User Manual for parameter settings. 8 OnLANTM System Software Upload Utility [. . . ]