Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual POLYCOM PTB400. We hope that this POLYCOM PTB400 user guide will be useful to you.
Lastmanuals help download the user guide POLYCOM PTB400.
You may also download the following manuals related to this product:
POLYCOM PTB400 REV C (567 ko)
Manual abstract: user guide POLYCOM PTB400
Detailed instructions for use are in the User's Guide.
[. . . ] The Link Dual Charger will only charge Nickel Metal Hydride (NiMH) Battery Packs; this charger will not charge Nickel-Cadmium (NiCd) Battery Packs. Be inserted into the rear slot with the side that attaches to the handset facing to the rear. See the cover photo for the correct orientation. [. . . ] The LEDs will light only when a handset or Battery Pack is inserted into the slots. To remove the Battery Pack from the handset, slide the Battery Pack down and off while pressing the Battery Pack release button on the back of the handset. To replace the Battery Pack, align the top of the Battery Pack with the arrows on the label on the back of the handset. Gently press and slide the pack toward the top of the handset until it snaps in place. You should not have to force it against the handset. The user must end any call in progress by pressing the END key on the handset before placing the handset into the charger. The call will not automatically terminate when the handset is placed in the charger. The Battery Pack and handset will only fit into the charger compartments one way. The handset should be inserted into the front slot, facing forward. The Link Dual Charger may occasionally need to be cleaned to maintain appearance and ensure battery contact. Wipe the surface with a clean, water-dampened cloth or paper towel to remove most films or residues. If the soiling is too stubborn for plain water, a mild detergent solution may be used. Be sure to wipe away any detergent residue with a plain water dampened cloth. dO NOT IMMERSE THE LINK DUAL CHARGER IN WATER OR OTHER LIQUID. The battery contacts may be cleaned with isopropyl (rubbing) alcohol applied with a cotton swab, cloth or paper towel. Do not push or pull the exposed battery contacts. [. . . ] Replacement Battery Packs are available from your supplier or servicing agent. Done charging, empty slot or unit is not powered. The Link Dual Charger will only successfully charge NiMH Battery Packs with a YELLOW label on the handset contact side. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE POLYCOM PTB400
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual POLYCOM PTB400 will begin.
POLYCOM PTB400 REV C (567 ko)
