User manual POLYCOM SOUNDSTATION 110V

[. . . ] 1 2 Installation and Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. 1 Installation Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. 2 Installation Process. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. 2. 1 Basic Network Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2. 2. 1. 1 DHCP or Manual TCP/IP Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2. 2. 1. 2 Provisioning File Transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. 2. 1. 3 Local User Interface Setup Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2. 2. 1. 4 Reset to Factory Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2. 2. 2 Application Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2. 2. 2. 1 Centralized Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2. 2. 2. 2 Local Phone Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2. 2. 3 Management of File Encryption and Decryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Navigate to: http://<phoneIPAddress>/appConf. htm#se For up to six registrations (depending on the phone model, in this case the maximum is six even for the IP 601), specify a display name, a SIP address, an optional display label, an authentication user ID and password, the number of line keys to use, and an optional array of registration servers. The authentication user ID and password are optional and for security reasons can be omitted from the configuration files. The local flash parameters will be used instead. The optional array of servers will override the servers specified in sip. cfg in non-Null. This will also override the servers on the appConf. htm web page. Navigate to: http://<phoneIPAddress>/reg. htm Changes are saved to local flash and backed up to <Ethernet address>-phone. cfg on the boot server. Changes will permanently override global settings unless deleted through the Reset Local Config menu selection. Local Local Phone User Interface Use the SIP Configuration menu to specify the local SIP signaling port, a default SIP server to register to and registration information for up to twelve registrations (depending on the phone model). The SIP Configuration menu contains a sub-set of all the parameters available in the configuration files. Either the Web Server or the boot server configuration files or the local phone user interface should be used to configure registrations, not a mixture of these options. When the SIP Configuration menu is used, it is assumed that all registrations use the same server. Changes are saved to local flash and backed up to <Ethernet address>-phone. cfg on the boot server. If no port is given, and none is found through DNS, 5060 will be used. Refer to http://www. ietf. org/rfc/rfc3263. txt for an example. Note Failure to resolve a DNS name is treated as signalling failure that will cause a fail over. 3. 6. 6 Microsoft® Office Live Communications Server 2005 Integration SoundPoint® IP phones can used with Microsoft® Office Live Communications Server 2005 and Microsoft® Office Communicator to help improve business efficiencies and increase productivity and to share ideas and information immediately with business contacts. Copyright © 2006 Polycom, Inc. 69 Administrator's Guide - SoundPoint® IP / SoundStation® IP Features Note Any contacts added through the SoundPoint® IP phone's buddy list will appear in as a contact in Microsoft® Office Communicator and Windows® Messenger. Important Do not use this feature with Busy Lamp Field feature (refer to 3. 1. 24 Busy Lamp Field on page 47). Configuration file: sip. cfg Specify that support for Microsoft® Office Live Communications Server 2005 is enabled. · For more information, refer to 4. 6. 1. 1. 4 SIP <SIP/> on page 88. Specify the line/registration number used to send SUBSCRIBE for presence. · For more information, refer to 4. 6. 1. 14 Presence <presence/> on page 129. Turn the presence and messaging features on or off. Central (boot server) · Configuration file: phone1. cfg For more information, refer to 4. 6. 1. 24 Feature <feature/> on page 144. Specify the number of line keys to assign per registration. · For more information, refer to 4. 6. 2. 1 Registration <reg/ > on page 149 Specify the line/registration number which has roaming buddies support enabled. · For more information, refer to 4. 6. 2. 8 Roaming Buddies <roaming_buddies/> on page 161. Specify the line/registration number which has roaming privacy support enabled. · Web Server (if enabled) Local Phone User Interface For more information, refer to 4. 6. 2. 9 Roaming Privacy <roaming_privacy/> on page 162. None. None. Local 70 Copyright © 2006 Polycom, Inc. Administrator's Guide - SoundPoint® IP / SoundStation® IP Features 3. 6. 6. 1 Configuration File Changes SoundPoint® IP phones can be deployed in two basic methods. In the first method, Microsoft® Office Live Communications Server 2005 serves as the call server and the phones have a single registration. [. . . ] The implementation was written so as to conform with Netscape's SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc. , code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft. com). [. . . ]