User manual PORT DESIGNS MANHATTAN BACKPACK TROLLEY BROCHURE

[. . . ] Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Disclaimer The information in this document is subject to change without notice. The manufacturer makes no representations or warranties with respect to the contents hereof and specifically disclaim any implied warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of the manufacturer to notify any person of such revision or changes. Limitations of Liability UNDER NO CIRCUMSTANCES SHALL PORT DESIGNS OR ITS SUPPLIERS BE LIABLE FOR DAMAGES OF ANY CHARACTER (E. G. DAMAGES FOR LOSS OF PROFIT, SOFTWARE RESTORATION, WORK STOPPAGE, LOSS OF SAVED DATA OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES) RESULTING FROM THE APPLICATION OR IMPROPER USE OF THE PORT DESIGNS PRODUCT OR FAILURE OF THE PRODUCT, EVEN IF PORT DESIGNS IS INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. [. . . ] (Default: No) Specifies with what severity log events will be sent to the specified log receivers. (Default: Default) Text describing the current object. (Optional) RoutingTable DestinationInterface DestinationNetworkExactly DestinationNetworkIn NextHop MetricRange RouterID OSPFRouteType OSPFTagRange LogEnabled LogSeverity Comments Note If no Index is specified when creating an instance of this type, the object will be placed last in the list and the Index will be equal to the length of the list. 78 3. 15. 2. DynamicRoutingRuleAddRoute Chapter 3. DynamicRoutingRuleExportOSPF Description An OSPF action is used to manipulate and export new or changed routes to an OSPF Router Process. Properties Index ExportToProcess SetTag SetRouteType OffsetMetric LimitMetricRange The index of the object, starting at 1. (Identifier) Specifies to which OSPF Process the route change should be exported. This tag can be used in other routers for filtering. (Optional) Increases the metric of the imported route by this value. (Optional) Limits the metrics for these routes to a minimum and maximum value, if a route has a higher or lower value then specified it will be set to the specified value. (Optional) Text describing the current object. (Optional) SetForward Comments Note If no Index is specified when creating an instance of this type, the object will be placed last in the list and the Index will be equal to the length of the list. 3. 15. 2. (Default: No) A (locally) unique cluster ID to use in identifying this group of HA security gateways. (Default: 0) Specifies the interface used for state synchronization. (Default: Master) How much sync data, in KB, to buffer while waiting for acknowledgments from the cluster peer. (Default: 1024) The maximum number of state sync packets to send in a burst. (Default: 20) The time to stay silent on startup or after reconfiguration. (Default: 5) Note This object type does not have am identifier and is identified by the name of the type only. There can only be one instance of this type. 82 3. 18. HTTPPoster Description Use the HTTP poster for dynamic DNS or automatic logon to services using web-based authentication. Properties URL1 URL2 URL3 RepDelay Comments The first URL that will be posted when the security gateway is loaded. (Optional) The second URL that will be posted when the security gateway is loaded. (Optional) The third URL that will be posted when the security gateway is loaded. (Optional) Delay in seconds until all URLs are refetched. [. . . ] (Default: AllowMultiple) Replace existing user if idle for more than this number of seconds. (Default: 10) Specifies the accounting servers that will be used to report user usage matching this rule. (Optional) Enable reporting of the number of bytes sent by the user. (Default: Yes) Enable reporting of the number of packets sent by the user. [. . . ]