User manual POULAN PRO PPR20H42STB

[. . . ] IMPORTANT MANUAL Do Not Throw Away 02478 OWNER'S MANUAL MODEL: WARNING: Read this Owner's Manual and follow all Warnings and Safety Instructions. Failure to do so can result in serious injury. PPR20H42STB LAWN TRACTOR ALWAYS WEAR EYE PROTECTION DURING OPERATION 183255 Rev. 1 9. 20. 02 RD/MH Printed in U. S. A. Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. SAFETY RULES · I. [. . . ] NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not. · Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced. OPERATOR PRESENCE SYSTEM Be sure operator presence and interlock systems are working properly. If your tractor does not function as described, repair the problem immediately. · The engine should not start unless the clutch/brake pedal is fully depressed and attachement clutch control is in the disengaged position. · When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine. · When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine. · The attachment clutch should never operate unless the operator is in the seat. BLADE CARE For best results mower blades must be kept sharp. Replace bent or damaged blades. CENTER HOLE BLADE REMOVAL (See Fig. 12) · · · Raise mower to highest position to allow access to blades. Remove blade bolt, lock washer and flat washer securing blade. Install new or resharpened blade with trailing edge up towards deck as shown. 5/8" BOLT OR PIN BLADE IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY. FIG. 13 · · Reassemble blade bolt, lock washer and flat washer in exact order as shown. torque). IMPORTANT: BLADE BOLT IS GRADE 8 HEAT TREATED. 17 CUSTOMER RESPONSIBILITIES BATTERY Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the battery with an automotive charger will extend its life. · Keep battery and terminals clean. · Recharge at 6-10 amperes for 1 hour. NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary. [. . . ] The Warranty period for any products used for rental or commercial purposes is limited to 90 days from the date of original purchase. This Warranty applies only to products which have been properly assembled, adjusted, operated, and maintained in accordance with the instructions furnished. This Warranty does not apply to any product which has been subjected to alteration, misuse, abuse, improper assembly or installation, delivery damage, or to normal wear of the product. Exclusions: Excluded from this Warranty are belts, blades, blade adapters, normal wear, normal adjustments, standard hardware and normal maintenance. [. . . ]