User manual POWERFIX KH 3277 FURNITURE TRANSPORT SET

[. . . ] Injuries are possible through the uncontrolled lowering of loads. Use the steering bar and the rolling supports only if they are in a faultless condition. Ensure that all doors and drawers that the piece of furniture might have are secured against unintentional opening before shunting it. [. . . ] The manufacturer accepts no liability for damages that result from improper use of the appliance or are caused by the incorrect operation of it. Immediately after unpacking check to ensure that all components are available and that there are no signs of visible damage to the furniture transporter with rolling supports: · 1 Lever arm with swivelling head · Remove the contents from furniture pieces before lifting and shunting them. Always slide the swivel head of the lever arm under the furniture to the stop plate. With this you will require the least effort. Push the swivelling head u of the lever arm q under the furniture and in the middle of it (A). To lift the furniture, slowly press the lever arm q down (B). Ensure that there is sufficient space available to work safely. Place one roller base e (C) under each raised corner of the furniture piece. To avoid an irregular elevation, always place the lever arm q in the middle of the side to be lifted. To lower the furniture piece onto the roller base e, slowly lift the lever arm q (D). With this you will require the least effort. To lower the furniture piece, slowly lift the lever arm q. Repeat the above procedure for the opposite side of the furniture piece. Repeat the above procedure for the opposite side of the furniture piece. [. . . ] Do not dispose of the appliance in your normal domestic waste. Dispose of the appliance through an approved disposal centre or at your community waste facility. observe the currently applicable regulations. [. . . ]