User manual POWERFIX KH 4008 LASER SPIRIT LEVEL

[. . . ] Do NOT use the appliance at locations that have a risk of fire or explosion, e. To avoid damage to the appliance, arrange for repairs to be carried out only by our Customer Services Department or qualified specialists. Remove the batteries if you do not intend to use the Laser Spirit Level for an extended period. Always change all batteries at the same time and always use batteries of the same type. [. . . ] Screw the levelling plate i onto the thread of the central column h of the tripod g. Bring the levelling plate i into a horizontal position by turning the adjustment screws u and use of the adjustment spirit level t. The water bubble of the spirit level t must be located between the two markings. Place the Laser Spirit Level in the mounting base j and fix it firmly with the securing clamp k. , then swivel the levelling plate i complete with the Laser Spirit Level through 90° y, by means of the 360° angle scale. Readjust the horizontal by turning the adjustment screws u and with use of the adjustment spirit level t. A readjustment may be necessary after the return swivel. The water bubble of the spirit level w must also be located between the two markings. On the competion of successful adjustment, the laser beam is always at the same height when the Laser Spirit Level is swivelled by means of the 360° angle scale y. The exactly by 90° deflected point laser produces a vertical reference level to the laser beam. This measuring method is especially helpful with for example the hanging of pictures. Insert the laser line attachment 2) into the laser optic r of the beforehand adjusted Laser Spirit Level. A line is then projected on to the wall, with which previously determined point-markings can be connected. Under no circumstance may the Laser Spirit Level be submersed in water or other liquids. do not use aggressive detergents or solvents. These could cause damage to the appliance, especially to the lettering. Clean all components of the appliance with a moist cloth. Clean the laser optic r with a soft brush. Do not dispose of the appliance in your normal domestic waste. This product is subject to the European guideline 2002/96/EC. [. . . ] Only in this way can a post-free despatch for your goods be assured. The warranty covers ONLY claims for material and maufacturing defects, not for wearing or consumable or for damage to fragile components. This product is for private use only and is not intended for commercial applications. The warranty will become void in the event of abusive and improper handling, use of force and internal tampering not carried or approved by our authorized service branch. [. . . ]