User manual PRECISION POWER DCX-730

[. . . ] (See Warranty inside back cover. ) Model: ___DCX-730 _____ Serial Number: ___________________ Date of Purchase: ___________________ CAUTION High-powered car audio systems may produce sound pressure levels that exceed the threshold at which hearing loss may result. They may also impair a driver's ability to hear traffic sounds or emergency vehicles. Use common sense and practice safe listening habits when listening to or adjusting your audio system. FEATURES/SPECIFICATIONS 24-bit DSP Adjustable DSP crossover 5 presets Mini USB port for control of functions via pc QBASS filter for programmable low frequency boost Built-in remote output with turn-on delay for switching on amps Controller features half-din chassis for ease of installation 1 INSTALLATION 1. [. . . ] Power connections for Ground, Remote In, +12V, and Remote Out. OPERATION When the unit is first powered up, the home menu will show on the LCD display. The Home icon in the upper left corner of the LCD screen will be highlighted and the Precision Power DCX-730 message appears. NOTE: Pressing the Mode button at any time will return you to the Home menu. Also, if the unit is in one of the other menus and is 4 left unattended for over a minute, the unit will return to the Home menu. If any of the settings are changed pressing the Mode button or after one minute elapses, the setting(s) will be saved to preset 6. Preset 6 is a scratchpad where settings are saved temporarily so that the setting(s) can be tried before saving to one of the 5 presets. The DCX-730 controller contains the control and provides the menu driven displays to adjust the digital processing power available within the unit. The user interface consists of a series of menus shown on the display and arrow buttons to navigate through the menus and to also set the individual available settings. These settings can then be saved to individual presets (maximum of 5) by using the number keys on the right hand side of the controller. Arrow Buttons Use the arrow buttons to navigate through the available menus and to adjust parameters. At the top level the arrow button will advance you to the next menu level. Once the desired parameter is selected, use the / buttons to move the cursor over to the parameter. You can then adjust the value of that parameter with the / arrow buttons. Recalling Presets While in the Home menu, if you press any of the numbered buttons on the right side of the controller the presets stored for that corresponding number will be loaded. The active preset presently used is displayed by the number in the square below the Home icon on the LCD panel. If a 6 is displayed there is no active preset loaded. Home Menu Display Precision Power DCX 730 State of The Art Mobile . 1 Indicates the preset memory location currently used. Use the number keys on the right side of the DCX-730 to select a Preset memory to be loaded. To store current parameters to a preset, push the preset button while in any menu other than home. When a preset is being loaded the following screen displays. . 5 Storing Presets While in any of the parameter menus, you can save any changes to settings by pressing the desired number button that you wish these settings to be saved to. The parameters which have changed will replace the default parameters in the preset. When a preset is being saved the following screen displays. MENUS Sensitivity The sensitivity parameter adjusts the unit's gain (input attenuation) to match the corresponding head unit. [. . . ] This warranty is non-transferable and does not apply to any unit that has been modified or used in a manner contrary to its intended purpose, and does not cover damage to the unit caused by installation or removal of the unit. This warranty is void if the product has been damaged by accident or unreasonable use, neglect, improper service or other causes not arising out of defects in materials or construction. ALL WARRANTIES INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND WARRANTY OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED TO THE MAXIMUM EXTENT ALLOWED BY LAW, AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. DIRECTED HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. [. . . ]