User manual PRESONUS MLAN PATCHBAY

[. . . ] · Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use. · The company names and product names in this owner's manual are the trademarks or registered trademarks of their respective companies. · The screen displays as illustrated in this owner's manual are for instructional purposes, and may appear somewhat different from the screens which appear on your computer. This owner's manual assumes that you are already familiar with basic Windows/Macintosh operation. If you are not, please refer to the owner's manual which came with your Windows/Mac OS software before using mLAN Patchbay. [. . . ] The mLAN connector's LED on the mLAN device that has received an "Identify" will flash for five seconds. Device Color. . . (Windows only) Open the Device Color dialog box. Device Color dialog box In the Device Color dialog box you can specify the display color for each mLAN device. 1. Select the mLAN device whose device color you wish to specify. Select the color that you wish to use for the mLAN device. If you wish to customize the color, click [Customize Color] and add the desired color. The selected color will be displayed in Sample Color. Click [OK], and the display color of the mLAN device will be changed. If you decide not to change the color, click [Cancel]. 6 Preference (Windows only) Open the Preference dialog box. In the Preference dialog box you can make settings for Shortcuts, Color and Other. Preference dialog box [Shortcuts] Specify (customize) the menu shortcut keys. 1. Select the menu item for which you wish to specify a shortcut key. Click the New Shortcut field, and then press the key that you wish to specify as the shortcut. If you click [Revert Panel], you will return to the settings of the previous step. If you click [Initial setting], the default settings (Ctrl + first letter of the action) will be applied. [Color] You can specify the color and background color in the data list. 1. Select an item to be edited and click [Color]. The selected color appears below the item. To reset the color and background color to their initial settings, click [Revert Sel] and [Revert Back] respectively. 7 [Other] Serial port: Select the COM port that is used to connect the computer and mLAN device. If there is a problem such as failure to read data, check whether this value matches the COM port you are actually using. Command Time out Time: Set the response time that is taken from the issuance of a command to the mLAN device until the receipt of a response from the device. If the system displays "Serial Timeout Error, " increase this value. Line space: Specify the display spacing at which mLAN plugs or mLAN devices are shown on a page. Popup menu type: Select the display method that will be used for popup menus when you connect a mLAN plug in the Audio or MIDI pages, or when you manually select the Master mLAN device for a Slave mLAN device in the WCLK page. Popup menu type For the Audio or MIDI page If you specify "Normal, " popup menus will be displayed as shown below. [. . . ] However, only one mLAN plug can be selected and dragged. Releasing the plug while holding down the Shift key works in the same way as [Connect All] in the Edit menu. (Windows) 15 Connect by dragging and releasing an mLAN plug (Macintosh) (Windows) Depending on the sorting, there may be cases as shown below in which a single "From" mLAN plug is connected to multiple "To" mLAN plugs. Spaces (blanks) will be displayed for the "From" mLAN plugs to indicate that the mLAN plug is identical. [. . . ]