User manual PRIMA PCU801

[. . . ] Improper use of urn may result in serious scald. As there is boiling water inside the urn, always ensure the lid is securely fitted whenever urn is turned on or hot water is inside. Be careful of hot steam when removing the lid for refilling Never switch on the urn when there is less than 3 litres of water inside or it is below the minimum level or above the maximum level. Otherwise, this will cause water spillage and damage to the heating element respectively. [. . . ] If in doubt consult a qualified electrician. WIRING FOR A 13AMP PLUG · · · · · · · · · · · · · · 3 Hot Water Urn Model: PCU801 Prior to First Use · Remove all packing materials from the inside and outside of the urn · BOIL FRESH WATER INSIDE THE URN ONCE AND DISCARD THE BOILED WATER BEFORE NORMAL USE. This is the best way to clean away any dust, debris or manufacturing residue, which could affect the taste of the water. · · · · · · Always use the appliance on a heat-resistant, flat surface. Fill the urn with the desired quantity of water not above the Max. The minimum amount of water that should be added is 3 litres, anything below this level will cause the urn to boil dry. Replace the lid by turning it clockwise until it locks into place. Plug the urn into the wall socket, press the On/Off switch up to turn the urn on. The BOIL indicator will then be illuminated. 4 How to Use The water will reach boiling point at approximately 98c - 100c. When this temperature has been reached the Urn will then switch onto KEEP WARM mode automatically and the keep warm light will be illuminated. On the keep warm mode the water temperature will remain at 85c - 90c From cold it takes approximately 50-60 minutes to boil 16 litres of water. When dispensing water via the tap hold the cup/vessel as close to the nozzle as possible to prevent splashing of hot water. If you need to top up the urn with more water it will automatically re-boil. If the urn boils dry refill with water and press the RESET button to reset the urn. Cleaning · It is extremely important to remember that cleaning of the urn can only be performed when the plug has been removed from the supply. · Never immerse any part of the urn into water. · Cleaning should be performed when the urn has cooled down. · Always ensure the electrical connections of the urn remain absolutely dry. · Clean the urn with a damp cloth. Do not use cleaning products, which can cause health hazard or discoloration of the urn. · Ensure the outside and the electrical connection parts of the urn are completely dry before using. De- scaling ­ IMPORTANT WARRANTY ISSUE · It is VITAL to de-scale the urn at regular intervals in order to maintain its looks and efficiency. [. . . ] IF YOU BOUGHT THIS PRODUCT VIA MAIL ORDER, PLEASE KEEP ALL THE DOCUMENTATION THAT CAME WHEN THE UNIT WAS DELIVERED. NAME____________________________________________________________ ADDRESS_________________________________________________________ __________________________________________________________________ PURCHASED FROM_________________________________________________ DATE OF PURCHASE ___________________MODEL_____________________ PLEASE REFER TO THE IMPORTANT WARRANTY ISSUE IN THE SECTION ON DE-SCALING. PRIMA CONTACT DETAILS For advice on Prima products call our Customer Services Department on 0844 581 5000. Please do not call us regarding warranties - your warranty exists with the retailer from which you purchased the product. If the product malfunctions during its warranty period it must be returned to the retailer from which it was purchased for replacement. [. . . ]