User manual PRISM SOUND DSCOPE SERIES III DATASHEET

[. . . ] <5Hz to maximum of input domain; see Input sections below. ±fs/2^24, or approximately ±0. 005Hz at fs=96kHz. 0. 1º Amplitude range, accuracy: Frequency range: Frequency accuracy: Frequency resolution: Signal Analyzer Channels: Amplitude range, accuracy: Frequency range: Frequency accuracy: Phase accuracy: Phase resolution: © 2003-2007 Prism Media Products Ltd 1. 1 Prism Sound dScope Series III Continuous-Time Analyzer Channels: Functions: Amplitude range, accuracy: Frequency range: High-pass filters: Low-pass filters: Weighting filters: BP/BR filters: Measurement rates: Responses: FFT Analyzer Channels: Functions: Specifications Continuously-reading multi-function detector Two, single selectable measurement function. Revision 1. 21 Amplitude, balance, band pass, band reject, cross-talk, gain, IMD CCIF, IMD SMPTE/DIN, noise, THD+N, user-scripted. Determined by selected input domain; see Input sections below. [. . . ] fs=48kHz: +0. 05/-0. 1dB: DC. . 20kHz; +0. 1/­3dB: DC. . 22. 75kHz; fs=96kHz: ±0. 05dB: DC. . 20kHz; +0. 05/­0. 1dB: DC. . 40kHz; +0. 1/­3dB: DC. . 45. 5kHz; fs=192kHz: ±0. 05dB: DC. . 20kHz; +0. 05/­0. 1dB: DC. . 40kHz; +0. 1/­3dB: DC. . 91kHz. 10Hz. . 5kHz: ±0. 5º, 5kHz. . 20kHz: ±1. 0º, 20kHz. . 50kHz: ±2. 0º. 1kHz: <130dB; 15kHz: <120dB, typically (22Hz­22kHz): <140dB. XLR or coaxial BNC (RCA adapters provided), maximum current 150mA, minimum load 150R. Balanced (normal or CM test): 50R, 150/200R (jumper), 600R or asymmetric 25R/600R; unbalanced: 25R or 600R. Switchable floating or chassis. Amplitude accuracy: Frequency range: Residual THD+N: Residual noise: Flatness (1kHz ref): Phase matching: DC offset: Interchannel cross-talk: Output connectors: Output impedance: Grounding: © 2003-2007 Prism Media Products Ltd 1. 3 Prism Sound dScope Series III Analogue Inputs Channels: Sample rate (fs): Maximum amplitude: Amplitude accuracy: Frequency range: Residual THD+N: Residual noise: Flatness (1kHz ref): Specifications Revision 1. 21 Two, independent. <1Hz. . 0. 49fs (94kHz at fs=192kHz, 47kHz at fs=96kHz, 23. 5kHz at fs=48kHz); DC coupling by jumper. (fs=96kHz, 1kHz, 22Hz. . 22kHz filters, unweighted, RMS): <­105dB (0. 00056%)+1. 5uV, typical ­108dB (0. 00040%)+1. 3uV. (fs=96kHz, 22Hz. . 22kHz filters, unweighted, RMS): <­115dBu (<1. 4uV). fs=48kHz: ±0. 05dB: 5Hz. . 22. 3kHz; +0. 05/­0. 1dB: 4Hz. . 22. 5kHz; +0. 1/­3dB: 1. 5Hz. . 23. 5kHz; fs=96kHz: ±0. 05dB: 5Hz. . 44. 7kHz; +0. 05/­0. 1dB: 4Hz. . 45kHz; +0. 1/­3dB: 1. 5Hz. . 47kHz;fs=192kHz: ±0. 05dB: 5Hz. . 89. 5kHz; +0. 05/­0. 1dB: 4Hz. . 90kHz; +0. 1/­3dB: 1. 5Hz. . 94kHz. 10Hz. . 5kHz: ±0. 5º, 5kHz. . 20kHz: ±1. 0º, 20kHz. . 50kHz: ±2. 0º. DC blocked: <0. 0001% of range, DC coupled: <2% of range. 1kHz: <130dB; 15kHz: <120dB, typically (22Hz­22kHz): <140dB . XLR or coaxial BNC (balanced and unbalanced RCA adapters provided), demodulated digital input jitter, or direct from generator. 100kR, 600R or 150/200R (jumper), maximum 1W. (20Hz. . 20kHz): >80dB. Phase accuracy: DC offset: Interchannel cross-talk: Input sources: Input impedance: Small-signal CMRR: © 2003-2007 Prism Media Products Ltd 1. 4 Prism Sound dScope Series III Digital Outputs (data) Channels: Sample rate (fs): Sample rate accuracy: Sample rate deviation: Wordlength: Dither: DC offset: Frequency range: Residual THD+N: Flatness (1kHz ref): Phase matching: Channel Check mode: Specifications Revision 1. 21 Two in normal (one-wire) mode, independent muting; one in Split96 (two-wire) mode. 32kHz, 44. 1kHz, 48kHz, 88. 2kHz*, 96kHz*, 176. 4kHz*, 192kHz* [*Generated normal or Split96]. User-defined, added to signal, 48-bit resolution. (1kHz, 24 bits, FS, 22Hz. . 22kHz bandwidth, unweighted, RMS): <­140dB (<0. 00001%). Generates data integrity sequence (PRBS) in 24, 20 or 16 bit wordlength which can be checked at digital input, or by Prism Sound DSA­1 hand-held analyzer. Professional or Consumer modes; all fields functionally or numerically settable for each channel (tied or split), with automatic options. Can generates EUT transparency check sequence. [. . . ] Range: 40mV to 20. 48Vp­p; accuracy: (XLR) ±5%+40mV, (BNC) ±5%+20mV; resolution: 5mV. (fs jitter mode): freq range: 700Hz. . fs/2, max amplitude 0. 5UIp­p; (data jitter mode): freq range 700Hz. . 64fs, max amplitude 0. 5UIp­p. Response: p­p; accuracy: ±5%+2ns; resolution: <300ps. (fs jitter mode): freq range: 700Hz. . fs/2, max amplitude 64UIp­p; (data jitter mode): freq range 700Hz. . 48kHzs, max amplitude 0. 5UIp­p. [. . . ]